Sale on Manual & Electric Hospital Beds - Starting from 25 September!

MediGear Group Limited
B2B
  1. Home
  2. Shop
  3. Hospital Furniture & Fixtures
  4. Keling KL-CB.I
✓ Certified Professional Seller Keling KL-CB.I
Keling KL-CB.I
Keling KL-CB.I
Keling KL-CB.I
Keling KL-CB.I
Keling KL-CB.I
Keling KL-CB.I
Keling KL-CB.I
Keling KL-CB.I
Keling Hospital Furniture & Fixtures

Keling KL-CB.I

Product Code: HFAF-HB-4226

Kneel, lean, lie on her side or sit up: the bed follows the mother.

The KL-CB supports a woman through every stage of labour, delivery, and recovery in the posture she chooses. It’s purpose. LINAK motors move it between chair, lateral, kneeling and lithotomy positions, and an inner panel gives her partial control.

Sections
Delivery Bed
Categories
Hospital Furniture & Fixtures
Condition
New
Origin
China
Seller Type
Certified Professional Seller
Size:
2350 × 960 × 550–850 mm
CE & ISO Certified
Global Shipping
Supplier: Medigear
Share: Facebook LinkedIn Twitter Pinterest

The KL-CB.I from Keling is a medical care bed built for maternity units that care for women throughout labour, delivery and recovery on one bed. It is 2350 mm long with the headboard and 960 mm wide with the guardrails, and its height adjusts from 550 to 850 mm (±50 mm), including an ultra-low position. The backboard rises at least 60° and the seatboard 12°, while Trendelenburg reaches 3° and reverse Trendelenburg 12°. The leg boards rise to 65° and split through 90°, and the foot section lifts at least 100 mm. Power is AC 220 V ±22 V, 50 Hz ±1 Hz, with an input of 150 VA ±10%.

The mother’s experience shapes the whole design. The bed fully supports free postures, so she can lie on her side, recline, sit upright in the chair position, kneel with her chest forward or lean over the raised backrest, moving between them as labour progresses. A control panel on the inner side of the guardrail lets her adjust part of the bed herself, giving her a sense of control, and staff can lock it when needed. The split mattress, imported artificial leather over high-density memory foam formed without gaps, supports her through long hours of labour, and the ultra-low height makes getting on and off easy.

For the midwife, imported LINAK motors drive every movement from double-sided guardrail control panels. The footboard raises and lowers electrically and folds upwards and outwards to clear the way for delivery. In an emergency, a fast CPR lever returns the backrest to its starting position. Imported central-control, double-sided castors move quietly and steadily, resist wear, and lock centrally with a one-foot brake.

The unit measures 2350 × 960 × 550–850 mm. It is available to business buyers in more than 80 countries.

The KL-CB.I is a labour, delivery and recovery bed for maternity units, obstetric wards and gynaecology departments. Midwives, obstetricians, anaesthetists and maternity nurses care for women on it from admission in early labour to recovery after birth.

In early and active labour, free postures matter most to the mother. She can lie on her side to rest, sit upright in the chair position, kneel with her chest forward or lean over the raised backrest, changing as contractions and the baby’s position require. The inner control panel lets her make some of those changes herself, and the midwife can lock it if needed.

Delivery takes place on the same bed. The footboard lowers and folds outward to open the end of the bed, and the leg boards rise to 65° and split to 90°. Supplied leg support frames then hold her in lithotomy for assisted delivery and for perineal repair afterwards. Beneath the delivery area, a stainless steel sewage basin collects fluids.

Recovery and observation also happen without a transfer. The backrest and seatboard bring her into a comfortable sitting position for feeding and bonding, and the ultra-low height makes her first stand easier. If her condition deteriorates, the fast CPR lever flattens the backrest immediately.

Gynaecology departments use the bed for examinations and minor lithotomy procedures. Maternity units moving to a single-room labour, delivery and recovery model gain most, because one bed serves the whole stay, LINAK motors keep movement smooth, and quiet central-locking castors let staff reposition it easily.

Free choice of posture

Lateral, recumbent, chair, knee-chest, kneeling and lithotomy positions are all supported.

Control for the mother

An inner guardrail panel lets her adjust part of the bed herself.

Lockable inner panel

Staff can lock the inner panel whenever needed.

One bed for the whole stay

Labour, delivery and recovery all take place without a transfer.

Rapid emergency response

The fast CPR lever returns the backrest to its starting position at once.

Smooth, quiet movement

Imported LINAK motors and quiet castors keep the room calm.

Easy access for delivery

The footboard lowers and folds upwards and outwards.

Easy getting in and out

The ultra-low function brings the bed down for safe transfers.

Comfortable split mattress

High-density memory foam under artificial leather supports long hours of use.

Imported LINAK motors

LINAK motors drive the bed’s movements.

Double-sided guardrail control panels

Controls are fitted on both sides of the guardrail.

Lockable inner control panel

An inner-side panel gives the mother partial control and can be locked.

Height of 550 to 850 mm

Height adjusts from 550 to 850 mm (±50 mm), with an ultra-low function.

Backboard up 60°

The backboard rises at least 60°.

Seatboard up 12°

The seatboard rises at least 12°.

Trendelenburg 3°, reverse 12°

Trendelenburg reaches at least 3° and reverse Trendelenburg at least 12°.

Leg boards 65° up, 90° split

The leg boards rise at least 65° and split through at least 90°.

Electric foot board

The foot board lifts at least 100 mm, lowers electrically and folds upwards and outwards.

Fast CPR lever

A lever returns the backrest to its initial position in an emergency.

Central-control double-sided castors

Imported castors are quiet, wear-resistant and stable, with central locking.

One-foot brake

A single foot pedal locks all the castors.

Split memory foam mattress

Imported artificial leather wraps high-density memory foam, formed without gaps.

150 VA on AC 220 V

The bed draws 150 VA ±10% from AC 220 V ±22 V, 50 Hz ±1 Hz.

Delivery accessories

The delivery accessories include leg support frames, a stainless sewage basin, a transfusion stand, and a power wire.

The KL-CB suits maternity units, labour wards, and gynaecology departments that want to care for women from labour to recovery on one bed. Its case is the mother’s experience: full support for free postures, from lying on her side to kneeling and leaning forward, a chair position, and an inner panel that lets her control part of the bed herself. Units adopting single-room labour, delivery and recovery care gain most. LINAK motors, double-sided guardrail controls, a fold-away footboard, a fast CPR lever and central-locking castors support the midwife. It measures 2350 × 960 mm and adjusts from 550 to 850 mm.

FAQ

Frequently Asked Questions

Everything buyers need to know about sourcing medical equipment through MediGear.

The KL-CB.I is a medical care bed designed for all stages of obstetric nursing care, from waiting for delivery through birth to recovery.

It supports free postures, including lateral, recumbent, lithotomy, knee-chest, leaning forward, or kneeling positions, as well as a chair position.

Yes. A control panel on the inner side of the guardrail lets her control part of the bed’s actions, and staff can lock it.

Imported LINAK motors power its movements, controlled from double-sided guardrail panels.

A fast CPR control lever quickly returns the backrest to its initial position.

The height adjusts from 550 to 850 mm (±50 mm) and includes an ultra-low function.

It raises and lowers electrically and folds upwards and outwards.

It uses imported, central-control, double-sided castors that are quiet, wear-resistant, and stable, with central locking via a one-foot brake.

It is a split mattress with imported artificial leather over high-density memory foam, formed in one piece with no gaps.

A pair of leg support frames, a stainless steel sewage basin, a transfusion stand and a power wire. A mobile auxiliary station is optional.

Keling manufactures the KL-CB under ISO 9001 and ISO 13485 quality management systems. ISO 13485 governs quality management for medical device manufacturers worldwide.