Visionstar BKS-5000

Five Litre Chamber

Capacity is 5.2L in a chamber of 380 by 180 by 78mm, with an external size of 580 by 460 by 190mm on the bench where the unit will actually stand.

Selectable Steam Temperature

Steam temperature is selectable from 115 to 135 degrees, so a condition is chosen to suit a load rather than one fixed setting being applied to everything.

Stainless Steel Chamber

The chamber material is stainless steel of the 304 grade, which is what withstands repeated heating, cooling and steam exposure without corroding over time.

Micron Rated Air Filter

A 0.22 micron filter is fitted, which is the standard rating used for retaining bacteria from air passing into a chamber during a sterilising cycle.

Forced Air Removal Design

Steam is injected into the loaded cassette and the polluted air inside is exhausted afterwards, which the manufacturer describes as a forced air removal design.

Short Cycle and Shortcut Keys

The shortest sterilisation cycle is stated at 6 to 7 minutes, with three shortcut keys provided and sterilising temperature and time both freely settable.

Water and Condition Protection

An alarm covers unqualified water and water shortage, the unit stops at low temperature or low pressure, and the water tank holds 3.4L between refills.

Printer and Accessories

A printer records the process, and standard accessories comprise an instrument loading tray, a waste water tank, a drain hose and two rolls of printing paper.

Dental and Oral Surgery

Stomatology is the first use named, and a cycle of a few minutes is what makes chairside sterilising practical. A dental surgery working through a busy list needs its handpieces and small instruments back quickly, and a cassette that travels from the machine to the chair without its contents being handled is as useful as the speed itself when it comes to maintaining a clean chain.

Ophthalmic Clinics

Ophthalmic instruments are fine, numerous and expensive, and selectable temperature matters here. Being able to run 115 rather than 135 degrees where a load allows it means less thermal stress on delicate tips and hinges across hundreds of cycles, which is what determines when a clinic next has to replace a set that it uses every single working day of the week.

Ear, Nose and Throat and Gynaecology

Both are named on the material. These are clinics working with small instrument sets, often in rooms without a dedicated decontamination area, and an external footprint of 580 by 460mm sits on a worktop rather than requiring its own space. The cassette doubling as temporary storage suits a room where processed sets wait between one patient and the next.

Operating Room Support

An operating room is the last setting named. The role is not processing a full theatre tray but turning round a small item quickly during a case, which is precisely where a cycle measured in minutes earns its place beside the larger sterilising equipment a theatre already runs, and where a printed record of that cycle is worth having afterwards in the theatre notes.

Temperature Chosen, Not Imposed

A selectable 115 to 135 degree range is far more useful than a single fixed condition, because instruments differ in what they tolerate. Running the lower end where a load permits reduces thermal stress across the hundreds of cycles a busy clinic puts through in a year, and that shows up directly in how often the fine instruments have to be replaced altogether, and not merely serviced again.

Air Handled Twice Over

Two provisions deal with air, which is the obstacle in any steam process. Injected steam drives the chamber air out and it is exhausted; a 0.22 micron filter then treats air passing in. Steam cannot reach a surface that air sits against, so an autoclave that both removes the air and filters what replaces it has addressed the problem from both of those directions at once.

A Record of What Happened

A printer producing a record of the process changes what a practice can demonstrate. Where a written decontamination procedure requires proper evidence, a printed record from the machine is considerably stronger than a figure copied into a logbook, and the two rolls of paper supplied with the unit suggest the manufacturer expects that printer to be used, and not left switched off entirely in a corner.

The Visionstar BKS-5000 holds 5.2L in a chamber of 380 by 180 by 78mm, with an external size of 580 by 460 by 190mm and a package size of 580 by 580 by 700mm. Steam temperature is selectable from 115 to 135 degrees, working pressure spans 42 to 212 kPa, ambient temperature is specified from 5 to 40 degrees and the water tank holds 3.4L. The chamber is stainless steel of the 304 grade, a 0.22 micron filter is fitted, the shortest cycle is stated at 6 to 7 minutes, three shortcut keys are provided, and an instrument loading tray, waste water tank, drain hose and two rolls of printing paper are supplied.

Two points need settling before an order. The heading and photographs on the card name three models while the data table lists a different set of three; the BKS-5000 appears in both, but any other model should be confirmed against the table. And the interface shown on the material is not in English, so whether an English option exists should be established directly. The electrical supply specification is not reproduced here.

If your surgery, clinic or theatre needs small instrument sets turned round quickly with a printed record, speak to Medigear.uk. As a verified medical equipment supplier working across medical, dental, rehabilitation and aquatic therapy settings, the team will confirm the interface language and the full configuration.