ROUNDFIN RD-BLIV

General histopathology laboratories embedding routine surgical specimens benefit from the RD-BLIV's broad cooling range — cold plate 30°C to -15°C, Cryo Module 5°C to -20°C — which accommodates standard and specialist paraffin formulations within the same unit without requiring separate cold stations for different media types. For NHS trusts and hospital procurement managers, CE certification provides the documentation baseline required for device validation, risk assessment sign-off, and procurement framework compliance. Medigear.uk provides full certification documentation and pre-purchase technical support to facilitate institutional procurement submissions.

High-throughput diagnostic laboratories processing dense oncology resections, neuropathology blocks, and fatty tissue specimens require cold plate performance that consistently accelerates block solidification across the entire working surface. The RD-BLIV's 315 × 380 mm Cryo Module surface accommodates multiple moulds simultaneously, and the inverter compressor maintains the set cooling temperature with greater precision than conventional fixed-speed systems, ensuring that blocks at the edges of the working surface solidify at the same rate as those placed centrally. The automatic restart function provides operational continuity after power interruptions without operator intervention.

Research institutions, veterinary pathology services, and specialist embedding facilities require cold plate instrumentation adaptable to non-standard tissue categories and embedding protocols. The RD-BLIV's adjustable freezing temperature — enabled by the inverter compressor — allows the set cold point to be tuned to the specific requirements of each tissue-paraffin combination rather than being fixed at a single default level. Medigear.uk supports OEM and configuration enquiries for the RD-BLIV through its B2B procurement channel.

Independent buyers and specialist clinics can acquire the RD-BLIV directly through Medigear.uk. At 710 × 350 × 390 mm and 25 KG, it suits most standard laboratory bench configurations and is compatible with the RD-BMIV embedding centre or any third-party embedding workstation.

Inverter Compressor for Adjustable and Precise Freezing Temperature

The new-type inverter compressor enables fully adjustable freezing temperature across the RD-BLIV's full operating range, rather than fixing cooling at a single pre-set level. This adjustability allows operators to set the Cryo Module to the precise cold temperature required for each tissue type and paraffin formulation, reducing over-cooling of delicate specimens and under-cooling of dense blocks. The inverter architecture also delivers more stable temperature maintenance, improved energy efficiency, and quieter operation than conventional fixed-speed compressor systems. This makes the RD-BLIV one of the most flexible cold plate instruments in its class available through Medigear.uk.

315 × 380 mm Cryo Module for Large-Batch Cold Working

The 315 × 380 mm Cryo Module working surface provides a large cold area for simultaneous cooling of multiple embedding moulds without requiring batching or queuing. This surface area directly addresses the cold plate bottleneck that limits throughput in high-volume embedding sessions, where smaller cold surfaces require moulds to be processed in multiple sequential loads. Temperature is maintained uniformly across the full surface area during operation, ensuring consistent solidification for all blocks placed on the plate simultaneously.

5°C to -20°C Cryo Module Operating Range

The Cryo Module's -20°C lower limit supports the most demanding block solidification requirements, including fatty specimens and high-melt paraffin formulations that require sustained cold exposure for complete hardening. The 5°C upper limit of the Cryo Module range allows the same unit to be used for gentler cooling applications where -20°C would cause specimen cracking or media fracture. This breadth of range eliminates the need for multiple cold-plate instruments with fixed temperatures for different specimen categories.

Automatic Restart After Power Failure

The automatic restart function resumes cold plate operation automatically after any power failure, restoring the previous set temperature without operator intervention. For laboratories running unattended overnight sessions or extended cold plate operation, this feature prevents a power interruption from leaving blocks warm and incomplete at the start of the next shift. The restart function works without manual re-initiation, supporting operational continuity even when the interruption occurs outside working hours.

Standalone Deployment Without Embedding Centre Dependency

The RD-BLIV operates as a fully independent cold plate unit, requiring no connection to any specific embedding centre, making it compatible with any laboratory workstation. This standalone capability means it can be added to an existing embedding setup without requiring system replacement or modification, and can be repositioned or used with different embedding centres as laboratory workflows change. The unit requires only a standard electrical supply connection for operation.

Broad Cold Plate Range: 30°C to -15°C

The overall cold plate temperature range of 30°C to -15°C supports both pre-cooling from ambient temperature and sustained low-temperature block cooling within the same unit. This broad range accommodates the full spectrum of cold plate applications encountered in routine and specialist histopathology, from gentle pre-cooling of freshly embedded blocks to sustained cold plate maintenance during extended embedding sessions.

100W Inverter-Efficiency Power Rating

At 100W, the RD-BLIV has notably low power consumption for a cold plate module capable of operating at -20 °C. This efficiency is a direct result of the inverter compressor architecture, which adjusts its output continuously to maintain the set temperature rather than running at full power throughout. The 100W rating adds minimal electrical load to the laboratory circuit and reduces the running cost of cold plate operation compared with conventional higher-wattage systems.

CE Certification for Regulated and NHS Procurement

The RD-BLIV carries CE certification confirming conformity with the applicable Medical Devices Directive requirements, satisfying the documentary prerequisite for NHS trust procurement approval, hospital device validation sign-off, and compliance with the regulated diagnostic laboratory procurement framework. Medigear.uk provides complete certification documentation, technical file summaries, and manufacturer declarations to support procurement submissions at any institutional level.

OEM Branding and Customisation Accepted

ROUNDFIN accepts OEM branding and customisation requests for the RD-BLIV, enabling distributors to source cold plate units aligned to their product portfolio and regional compliance requirements. OEM arrangements cover labelling, documentation, and brand presentation, and can include temperature range customisation — with the cold plate reaching as low as -20°C as standard. Full OEM terms are managed through the Medigear—UK B2B procurement team.

Cryo Module Operating Range: 5°C to -20°C

The Cryo Module operates between 5°C and -20°C, with a temperature setting of ≤-5°C. The -20°C lower limit meets demanding block solidification requirements for both standard and specialist paraffin formulations. The 5°C upper limit allows the module to be used for gentler cold-plate applications without overcooling fragile specimens.

Cold Plate Temperature Range: 30°C to -15°C

The overall cold plate temperature range of 30°C to -15°C covers ambient pre-cooling through sustained low-temperature block cooling. This range accommodates the full spectrum of cold plate applications in routine and specialist histopathology without requiring separate instruments for different temperature requirements.

Cryo Module Surface: 315 mm × 380 mm

The Cryo Module provides a 315 × 380 mm cold-working surface for the simultaneous cooling of multiple embedding moulds. Temperature is maintained uniformly across the full surface area throughout operation. The surface dimensions are among the largest in this cold plate module class available through Medigear.uk.

New-Type Inverter Compressor

The inverter compressor drives the RD-BLIV's refrigeration system with variable-speed output, providing adjustable freezing temperature, more precise cold plate temperature maintenance, improved energy efficiency, and quieter operation than fixed-speed compressor alternatives. The inverter architecture is the primary differentiating feature of the RD-BLIV's cooling performance.

Adjustable Freezing Temperature

The inverter compressor enables the cold plate and Cryo Module temperatures to be set at any point within their respective operating ranges, rather than at a fixed pre-set level. This adjustability enables protocol-specific temperature tuning across different tissue types, paraffin formulations, and embedding media without requiring multiple cold-plate instruments.

Automatic Restart After Power Failure

Following any power failure, the RD-BLIV automatically resumes cold plate operation at the previously set temperature without operator input. The restart function applies to any duration of power interruption and operates without manual reinitiation, providing operational continuity for unattended and overnight cold-plate sessions.

Modular Standalone or Paired Deployment

The RD-BLIV operates independently alongside any compatible embedding centre or pairs with the ROUNDFIN RD-BMIV to form the complete RD-BMIV&BLIV system. The modular architecture supports phased procurement, independent servicing, and future workflow changes without requiring full system replacement.

Power: 100W, Dual-Voltage AC220V and AC110V

The RD-BLIV is rated at 100W — a low consumption figure reflecting the inverter compressor's efficiency — and accepts AC220V +10% 50Hz (standard model) or AC110V +10% 60Hz. Dual-voltage compatibility supports international deployment without transformer conversion. Electrical requirements should be confirmed with the Medigear.uk team before delivery.

Physical Dimensions: 710 mm × 350 mm × 390 mm, 25 KG

The RD-BLIV measures 710 mm × 350 mm × 390 mm (W×D×H) at a net weight of 25 KG, providing a stable, full-surface cold plate unit suited to standard laboratory bench configurations. The 710 mm width allows the Cryo Module's 315 × 380 mm surface to be presented without restriction.

CE Certification

The RD-BLIV carries CE certification confirming conformity with applicable Medical Devices Directive requirements. CE marking satisfies the documentary prerequisite for NHS trust and hospital procurement approval. Complete certification documentation is available from Medigear.uk on request.

Compatible with Third-Party Embedding Centres

The RD-BLIV's standalone architecture allows it to be used alongside embedding centres from any manufacturer. This cross-compatibility makes it a practical cold plate upgrade for laboratories with existing embedding equipment, without requiring full system replacement. Medigear.uk can advise on integration with specific third-party configurations.

OEM and Temperature Customisation Available

ROUNDFIN accepts OEM branding and temperature range customisation for the RD-BLIV, including customisation of the cold plate's lower temperature limit. OEM and customisation enquiries are managed through the Medigear UK B2B procurement team.

The ROUNDFIN RD-BLIV tissue embedding cold plate provides a validated, modular cold plate platform suited to routine histopathology laboratories, high-throughput diagnostic services, research and veterinary pathology facilities, and independently operated clinical environments. Its Cryo Module with 5°C to -20°C operating range, 315 × 380 mm cold working surface, inverter compressor for adjustable freezing temperature, automatic restart after power failure, and flexible standalone or paired deployment with the RD-BMIV collectively address the operational requirements of institutional procurement teams, specialist distributors, and individual laboratory managers. CE certification confirms compliance with applicable medical device standards, and full documentation is available via Medigear.uk. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.