The BBS-H1300 and BBS-H1800 serve laboratories that handle samples in HEPA-filtered air: research laboratories, hospital laboratories, pathology departments and blood banks. A work zone of 1200 or 1700 mm gives technicians room to lay out samples, tubes and small devices in one stream of clean air, with the work surface at 750 mm.
The working routine runs through the front panel. Technicians raise the motorised window to the required opening, up to 430 mm, and read the airflow velocity on the LCD display. Two waterproof sockets in the side panel power small devices inside the cabinet, and a gas tap is fitted for tasks that call for a gas supply. The BBS-H1800 also ships with a water tap.
When the work ends, one press lowers the window and the UV timer is set from 0 to 90 minutes. The UV lamp emits at 253.7 nanometres, and its interlock with the LED lamp, the blower, and the front window keeps the cycle tied to the cabinet's state. The LCD display then logs UV work time and system work time, which gives the team a record of lamp hours.
Two widths let a laboratory match the cabinet to the space and the workload. Both models share the same airflow range, filtration and controls, so a laboratory running both follows one routine at every bench.
The cabinets are specified for rooms at 15 to 35°C and up to 75% relative humidity. The work table carries a load of 23 kg per 25 × 25 cm², and the 304 stainless steel surface is a corrosion-resistant base for daily laboratory use.







