Grace Medy JCE3-KYPS-1

In a general outpatient or GP surgery examination room, the Grace Medy JCE3-KYPS-1 Electric Examination Bed eliminates the fixed-height constraint that increases the risk of manual handling for clinical staff conducting high volumes of patient assessments each day. The motorised height range, from 700 mm to 950 mm, covers the ergonomic requirements of seated auscultation through to standing abdominal examination without the clinician needing to alter their posture between patients. Medigear.uk supports NHS primary care networks and independent practice procurement leads with the documentation and pricing structures needed for efficient single-unit and multi-unit acquisition.

In a hospital outpatient diagnostic department, the JCE3-KYPS-1’s three motorised functions — height, back-tilt to 60°, and leg-tilt 60° up and 30° down — allow the bed to serve multiple diagnostic disciplines from a single installation. Respiratory medicine, gastroenterology, and musculoskeletal assessment teams can each use the same bed at the positioning angle appropriate to their examination protocols, without requiring separate specialised couches for each discipline. The foot controller allows uninterrupted clinical contact during repositioning, which is particularly relevant in neurological and soft-tissue assessments where positional changes must be precisely timed.

In a minor procedures or treatment room setting, the JCE3-KYPS-1’s 250 mm height travel range allows the clinician to raise the bed to an optimal working height for wound care, venepuncture, and minor surgical procedures, then lower it to facilitate patient transfer before and after the intervention. The four-floor brakes provide the positional stability required during procedures in which the clinician applies lateral force to the bed surface. The 6 cm standard mattress and wipeable surface support the rapid bed turnaround needed in high-volume treatment environments. Medigear.uk can assist procurement leads in configuring the JCE3-KYPS-1 with procedure-appropriate accessories.

For home care or private clinic deployment, the JCE3-KYPS-1 offers individual buyers and small clinic operators access to the same motorised platform used in NHS outpatient settings, without the infrastructure demands of a fixed installation. The castor-mounted frame allows the bed to be repositioned within a consulting room or moved between treatment spaces, and the foot controller requires no specialist training beyond a standard clinical familiarisation session. Individual buyers and private practice owners can arrange purchase, delivery, and setup support directly through Medigear.uk.

Motorised Three-Function Control for Hands-Free Clinical Examination

The JCE3-KYPS-1 provides height, back tilt, and leg tilt control via a single foot controller, allowing the clinician to reposition the patient without leaving the examination area. This hands-free capability is clinically significant in assessments where continuous physical contact — palpation, auscultation, or postural testing — must be maintained during positional changes. NHS outpatient departments and private clinics will recognise the reduction in examination interruption time that foot-controlled motorised beds offer compared with manual alternatives.

250 mm Height Travel Range for Ergonomic Versatility

A 700 mm to 950 mm motorised height range accommodates the postural requirements of seated and standing clinicians across the full range of general examination disciplines. Adjustable-height examination beds are directly associated with reduced clinician musculoskeletal strain in systematic reviews of ergonomic equipment in clinical settings, and the JCE3-KYPS-1’s electric adjustment eliminates the manual pumping or cranking mechanism that can introduce vibration or positional imprecision. Medigear.uk can advise on height suitability for specific departmental ergonomic assessments.

CE Certified for NHS and Private Healthcare Procurement

CE certification confirms that the JCE3-KYPS-1 meets the essential safety, performance, and quality requirements applicable to electrically operated medical examination beds under the relevant Medical Devices Directive. NHS trusts, GP practice managers, and private clinic owners can include this product in their equipment registers with the regulatory assurance required for clinical governance compliance. Medigear.uk holds full certification documentation and can supply Declarations of Conformity to support procurement governance submissions.

Bidirectional Leg-Tilt for Expanded Examination Protocols

The leg section’s 60° upward and 30° downward travel supports both knee-flexion examination positions and dependent leg positioning, extending the clinical utility of the JCE3-KYPS-1 beyond the single-direction leg-rest found on standard examination couches. Vascular assessments, lower limb oedema evaluations, and pelvic examinations each benefit from independent leg-tilt control, and the ability to lower the leg section 30° below horizontal is particularly relevant in dependent limb positioning for venous insufficiency assessment.

Complete Standard Configuration for Immediate Clinical Readiness

The JCE3-KYPS-1 is supplied with a complete standard configuration: one high-grade medical motor, foot controller, control box, four 4-inch luxury castors, four floor brakes, and a 6-cm-thick mattress. This complete out-of-the-box configuration means the bed is clinically operational upon installation, without the need to procure supplementary accessories, which is particularly valuable for GP surgeries and clinic operators managing tight commissioning timelines. Medigear.uk provides delivery and setup support to ensure immediate readiness upon arrival.

Quiet Motor Operation for Patient Comfort and Clinical Environment

The single high-grade medical motor on the JCE3-KYPS-1 is specified for quiet operation, reducing the acoustic impact of height and angle adjustments on patients who may experience anxiety in clinical examination settings. Quiet motorised adjustment also supports examination environments where auditory assessments — such as auscultation — are ongoing during positional changes, without introducing motor noise that could interfere with the clinician’s assessment. This operational characteristic aligns the JCE3-KYPS-1 with the acoustic standards expected in NHS outpatient and diagnostic settings.

OEM and Bulk Configuration for Distributor Portfolios

Grace Medy’s OEM programme enables distributors to configure the JCE3-KYPS-1 with custom upholstery colours, branded panels, and accessory specifications tailored to target healthcare markets. With production capacity exceeding 1,000 units per month and export documentation for more than 45 countries, Grace Medy supports high-volume supply agreements with consistent quality and defined lead times. Distributors building examination bed product lines for NHS frameworks, private healthcare networks, or export markets should contact Medigear.uk to discuss terms and certification support.

Castors and Floor Brakes for Safe Clinical Mobility

Four 4-inch luxury castors and four independent floor brakes provide the JCE3-KYPS-1 with the mobility and positional security required in a high-use clinical environment. The castors enable effortless repositioning between bay locations or consulting rooms, while the four-point brake system locks the bed securely during examination and motor operation. This combination is a standard clinical requirement for motorised examination beds and is specified in the JCE3-KYPS-1 as part of the base configuration rather than as an optional accessory.

Home Care and Small Clinic Accessibility for Individual Buyers

Individual buyers, small private practices, and community clinic operators can access the full motorised specification of the JCE3-KYPS-1 through Medigear.uk without navigating institutional procurement processes. The castor-mounted frame is repositionable within a standard consulting room, the foot controller requires minimal familiarisation, and the complete accessory configuration means no supplementary purchases are needed at commissioning. Medigear.uk provides direct purchasing, delivery coordination, and aftercare support for individual and small-volume buyers.

Minimum Height: 700 mm

The JCE3-KYPS-1 lowers to 700 mm above floor level, a height that allows most adult patients to mount and dismount the examination surface without assistance, reducing manual handling demand on clinical staff. This minimum height also positions the bed surface within the comfortable seated-working range for clinicians conducting lower-limb examinations in a seated posture.

Maximum Height: 950 mm

At 950 mm, the JCE3-KYPS-1 raises the patient surface to a standing-clinician-optimal working height for thoracic, abdominal, and musculoskeletal examinations, eliminating the lumbar flexion associated with fixed-height examination tables set below ergonomic working height. The 950 mm maximum also facilitates overhead procedures and examination of patients who require the clinician to work at a raised angle relative to the surface.

Total Height Travel Range: 700-950 mm (250 mm)

The 250 mm motorised travel range delivered by the single medical-grade motor provides clinically meaningful ergonomic flexibility across a single bed, removing the need for separate high and low examination surfaces in multi-disciplinary outpatient settings. Electric adjustment across this range is continuous and smooth, with no stepped positions, allowing the clinician to stop at any intermediate height appropriate to the examination in progress.

Back-Tilt Range: 0° to 60° (±5°)

The back section tilts electrically from flat to 60° (±5°), supporting supine, Fowler’s, high-Fowler’s, and near-seated examination positions without manual adjustment or patient effort. This range covers the positioning requirements of respiratory, abdominal, neurological, and general physical examination disciplines, making the JCE3-KYPS-1 suitable as a single examination platform across multi-disciplinary outpatient settings.

Leg-Tilt Range: 60° Up / 30° Down

The leg section articulates 60° upward for knee-flexion and pelvic examination support, and 30° downward for dependent limb positioning in vascular and lower-limb assessments. This bidirectional range is a functional specification that distinguishes the JCE3-KYPS-1 from fixed or single-direction leg-rest examination couches and expands its clinical applicability without additional equipment.

1 High-Grade Medical Motor

One high-grade medical motor drives the height adjustment function, operating quietly and smoothly under the control of the foot controller. Medical-grade motors are specified for longevity and reliability in high-cycle clinical environments, where height adjustment may occur dozens of times per day over the course of a working week. The motor specification is confirmed in Grace Medy’s manufacturing documentation, available through Medigear.uk.

Foot Controller for Hands-Free Operation

The foot controller enables height, back tilt, and leg tilt adjustments via foot-operated inputs, allowing the clinician to reposition the patient without releasing contact during the examination. This hands-free capability is a core clinical workflow requirement in outpatient settings, where examination continuity is a priority for patient safety and diagnostic accuracy. The foot controller is included as standard with every JCE3-KYPS-1 unit.

Control Box — Included as Standard

A dedicated control box manages the JCE3-KYPS-1’s electrical system, providing the interface between the foot controller, motor, and power supply. The control box is included as standard and does not require separate procurement. Electrical system documentation, including wiring diagrams and power requirements, is available from the Medigear.uk procurement team for installation planning purposes.

Four 4-Inch Luxury Castors

Four 4-inch luxury castors provide smooth, multidirectional movement across standard clinical and consulting room flooring. The castor specification is selected for quiet operation and flooring compatibility across vinyl, linoleum, and sealed surfaces common in NHS and private clinical environments. Castor quality directly affects the ease of repositioning and the long-term condition of clinical flooring, both of which are relevant to facilities management and estates planning.

Four Floor Brakes

Four independent floor brakes lock all four castors, securing the JCE3-KYPS-1 in position during examination and motorised height changes. Full four-point brake engagement before initiating height adjustment is the recommended safe operating practice. The floor brakes are foot-operated and require no tools to engage or release, enabling rapid and safe bed positioning throughout a clinical session.

6 cm Thick Standard Mattress — Included

A 6 cm thick mattress is included as standard, providing adequate patient cushioning across the full range of positions supported by the JCE3-KYPS-1’s three functions. The mattress surface is compatible with standard clinical disinfection products, supporting the rapid bed turnaround required in high-volume outpatient and examination environments. Clinics requiring specialist pressure-relief or antimicrobial mattress covers should confirm compatibility with the Medigear.uk team.

Overall Dimensions: 1910 × 600 × 700-950 mm

The complete assembled bed measures 1910 mm in length and 600 mm in width, providing a clinically appropriate examination surface while maintaining a compact footprint for single-room and shared consulting environments. The 600 mm width is the established standard for adult examination couches, providing lateral stability without requiring a wide room footprint that would restrict clinical access around the bed.

CE Certification — Medical Devices Directive Compliant

The JCE3-KYPS-1 carries CE certification confirming conformity with essential health, safety, and performance requirements for electrically operated medical examination beds. Full certification documentation, including Declaration of Conformity and applicable test reports, is available from the Medigear.uk procurement team and supports NHS trust, private healthcare, and international regulatory procurement submissions.

OEM Configuration Available Through Medigear.uk

Grace Medy’s OEM programme allows distributors and institutional buyers to specify the JCE3-KYPS-1 with custom upholstery colours, branded panels, and accessory configurations through Medigear.uk. Minimum order quantities, configuration lead times, and white-label certification support are all discussed at the point of enquiry with the Medigear.uk procurement team, making the JCE3-KYPS-1 a flexible product for distributors building differentiated examination bed portfolios.

The Grace Medy JCE3-KYPS-1 Electric Examination Bed delivers a fully motorised three-function examination platform that serves outpatient wards, GP surgeries, hospital diagnostic departments, minor procedure rooms, and private clinic environments with equal clinical effectiveness. Its 700-950 mm motorised height range, 60° back-tilt, bidirectional leg-tilt, foot-controller operation, and complete standard configuration — including motor, controller, castors, brakes, and 6 cm mattress — are specified to meet the ergonomic, governance, and infection control requirements of NHS and private healthcare procurement, supported by CE certification under the applicable Medical Devices Directive. Distributors benefit from OEM customisation and bulk supply capacity, while individual buyers receive direct purchasing support. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.