Grace Medy BCMGK-SMJ01-01

Orthopaedic inpatient wards are the primary deployment setting for the Grace Medy BCMGK-SMJ01-01. The three-function platform supports the range of patient positions required for fracture management, post-arthroplasty care, spinal injury monitoring, and soft-tissue repair recovery. The stainless steel gantry traction frame, supplied as standard, enables both skin and skeletal traction without the need for a separate traction stand, reducing equipment overhead for NHS procurement teams. Medigear.uk can supply the full package, including optional accessories, for institutional orders.

Post-surgical rehabilitation units benefit from the independent back and leg lift functions, which allow physiotherapy teams to progress patient positioning as recovery advances. The 0–75° backrest range covers post-operative flat positioning through to upright sitting for pre-mobilisation exercises, while the 0–45° leg section supports graduated lower limb loading protocols. The ABS guardrails and stainless-steel grab handles reduce the risk of falls during early mobilisation. Medigear.uk procurement advisors can advise on configuration options for rehabilitation specifications.

Paediatric orthopaedic settings represent an additional deployment context for the BCMGK-SMJ01-01, which the manufacturer documents as suitable for children requiring orthopaedic traction and recovery support. The traction frame and gear guardrail set provide lateral protection during periods of restricted patient mobility. Procurement teams sourcing paediatric orthopaedic wards should confirm sizing suitability with the Medigear.uk team before placing bulk orders.

Distributors supplying orthopaedic equipment can obtain a CE-certified traction bed from Medigear.uk that combines three-function positioning with a factory-included gantry frame. The optional accessory package, including a low-pressure rod, drain, and shelf, broadens clinical utility across different ward layouts. OEM customisation and container-load pricing are negotiated through the Medigear.uk procurement team for distributor partners.

0–75° Backrest Range Covering the Full Clinical Positioning Spectrum

The BCMGK-SMJ01-01 backrest extends from flat to 75° (±5°), covering every clinically significant upper body position from post-operative flat rest through semi-Fowler, Fowler, and high-Fowler configurations. This range exceeds the 60–70° upper limit common in standard ward beds, giving orthopaedic and rehabilitation wards a single platform capable of supporting the entire positioning arc without requiring patient transfers to a chair or supplementary support. The clinical flexibility of the 75° backrest is a key differentiator for procurement teams specifying beds for complex or long-stay orthopaedic patients. Medigear.uk can confirm the exact adjustment mechanism and increment detail upon request.

Stainless Steel Gantry Traction Frame Included as Standard Accessory

The full stainless-steel gantry traction frame is included with the BCMGK-SMJ01-01 at no additional cost, thereby removing a significant procurement burden from orthopaedic ward equipment budgets. Having the traction frame as a standard component means the bed arrives ready for skeletal and skin traction applications on the day of commissioning, without waiting for a separately sourced frame to be delivered and fitted. For NHS trusts and distributors supplying orthopaedic departments, this removes a procurement variable and simplifies the bill of materials for each bed unit ordered through Medigear.uk.

Independent Back and Leg Lift Functions for Precision Therapeutic Positioning

The backrest and leg sections of the BCMGK-SMJ01-01 operate independently, allowing clinicians to configure a combined position — an elevated backrest with a raised leg section — that distributes patient weight away from pressure points at the sacrum and heels. This contoured positioning is clinically significant in long-stay orthopaedic patients at elevated risk of pressure injury, and the ability to adjust each section independently gives physiotherapy and nursing teams fine control over position without disturbing traction fixings. Medigear.uk can advise on how the BCMGK-SMJ01-01 positioning functions align with specific clinical governance requirements.

CE Certified Compliance for NHS and Regulated Healthcare Procurement

The BCMGK-SMJ01-01 carries CE certification in line with the applicable Medical Device Directive, providing NHS trust procurement officers and regulated private healthcare buyers with the documentary baseline required for supplier approval. Medigear. The UK holds the full conformity documentation package and can be supplied alongside product data sheets, technical drawings, and accessory specifications to support institutional qualification processes. For distributors managing multiple hospital clients, CE certification across a consistent product range simplifies the compliance management overhead at each deployment site.

Gear Guardrail System for Lateral Safety in Traction Patients

The gear guardrail set supplied with the BCMGK-SMJ01-01 provides smooth, controlled lowering and raising for safe patient access and fall prevention, which is particularly important for orthopaedic patients in traction or immediately post-surgery who cannot be asked to roll away from a dropping rail. Gear-mechanism guardrails reduce the risk of patient entrapment and sudden lateral displacement that can disturb fracture reduction or wound sites. For NHS clinical governance teams setting equipment standards for orthopaedic wards, a specified guardrail mechanism type is an important procurement parameter. Medigear.uk can supply guardrail dimensional drawings upon request.

Four Castors Enabling Controlled Ward Repositioning

The four-caster base of the BCMGK-SMJ01-01 allows the bed to be repositioned within the ward bay for clinical access, imaging procedures, or room cleaning without requiring a mechanical hoist or additional staff. Castor braking should be confirmed to be engaged at all times when the bed is stationary, particularly during traction procedures, where frame stability is essential for maintaining a consistent traction load. The four-point castor arrangement distributes the combined weight of the bed, traction frame, and patient across a wide base, reducing the risk of tipping during repositioning on uneven ward flooring.

Comprehensive Optional Accessory Package Extending Clinical Utility

The low-pressure rod, drain, and shelf optional accessories allow the BCMGK-SMJ01-01 to be configured for post-surgical patients with wound drain management needs, pressure therapy requirements, or extended-stay storage needs without adding supplementary furniture to the bay. Ordering optional accessories at the same time as the bed unit through Medigear.uk ensures accessory compatibility and reduces the administrative overhead of managing separate procurement lines for the same clinical deployment. Procurement teams can discuss accessory bundling options and pricing with the Medigear.uk team before confirming the order.

ABS Head and Footboard Set for Durability and Infection Control

The head and footboard set supplied with the BCMGK-SMJ01-01 is fabricated from ABS plastic, which is a standard material for hospital bed board components due to its resistance to repeated disinfectant cleaning, impact resistance, and ease of replacement if damaged. ABS boards are lighter than stainless steel alternatives, simplifying removal and reattachment during bed cleaning cycles. The boards contribute to the bed's structural frame and provide a clinical mounting point for name boards, fluid charts, and other patient identification materials in orthopaedic ward settings.

OEM and Bulk Customisation Supported for Distributor Partners

Grace Medy supports full OEM customisation of the BCMGK-SMJ01-01 for distributors, including branded finishes, modified frame specifications, alternative colour schemes, and documentation packages for specific regulatory markets. Container-load pricing and production scheduling for large institutional orders are negotiated through Medigear.uk, which manages the supplier relationship for all bulk trade buyers. Distributors equipping multi-site hospital networks can use the BCMGK-SMJ01-01 as a core orthopaedic bed specification, with OEM customisation providing the brand consistency their healthcare clients require.

Backrest Adjustment Range: 0–75° (±5°)

The backrest section of the BCMGK-SMJ01-01 adjusts from flat to a maximum of 75°, with a tolerance of ±5°. This range covers every standard clinical backrest position used in orthopaedic and general inpatient care, from post-operative flat rest through Fowler configurations. The 75° upper limit offers greater positioning flexibility than the 60° maximum commonly found on standard ward beds.

Leg Lift Range: 0–45° (±5°)

The leg section lifts from flat to a maximum of 45°, with a tolerance of ±5°. This elevation range supports lower-limb oedema reduction, DVT-prevention positioning, graduated sitting exercises, and post-fracture lower-limb immobilisation. The independent leg lift operates without affecting the backrest position, allowing combined therapeutic configurations.

Overall Frame Dimensions: 2090 × 960 × 500 mm

The bed frame measures 2090 mm in length, 960 mm in width, and 500 mm in base height. The 2090 mm overall length includes the head and footboard projections beyond the bed surface, which procurement teams should factor into bay-dimension planning. The 960 mm frame width is standard for inpatient beds and accommodates bilateral clinical access.

Bed Surface Dimensions: 1950 × 900 mm

The usable lying surface is 1950 mm in length and 900 mm in width, providing one of the most generous patient areas in the Grace Medy inpatient range. The 900 mm width is wider than the 800–850 mm standard on many ward beds, offering additional lateral comfort for traction patients who cannot reposition independently.

Stainless Steel Gantry Traction Frame: 1 Set (Standard)

A full stainless steel gantry traction frame is included as a standard accessory. The frame provides the overhead structural support required for skin and skeletal traction applications and is fabricated from stainless steel for corrosion resistance and long-term clinical durability. No separate traction stand is required when using the standard accessory package.

Castors: ×4

Four castors are fitted to the base of the BCMGK-SMJ01-01, enabling controlled repositioning of the complete bed within the ward bay. Castors should be locked whenever the bed is stationary, particularly during traction procedures. Castor specifications, including wheel diameter and brake mechanism, can be confirmed with the Medigear.uk procurement team.

Stainless Steel Grab Handles: ×2

Two stainless steel grab handles are supplied as standard accessories. These provide a secure grip point for patients during position changes, mobilisation exercises, and bed transfers, and support clinical staff during patient repositioning procedures. Stainless steel construction ensures the handles withstand repeated cleaning with clinical disinfectants without surface degradation.

Guardrail: Gear Guardrail Set (×1 Set)

The gear Setrdrail set provides lateral fall prevention using a smooth, gear-controlled raising and lowering mechanism. Gear guardrails eliminate the sudden drop associated with pin-release rail systems, reducing the risk of patient startlement, fracture disturbance, or wound disruption during rail operation. The guardrail set should be confirmed as correctly engaged on both sides whenever the bed is occupied.

Head and Footboard: ABS (×1 Set)

One Set of steel and wooden boards fabricated from ABS plastic is supplied as standard. ABS is the material of choice for inpatient bed boards because it resists impact, cleans easily with disinfectants, and is lighter than stainless steel alternatives. The boards are removable for bed cleaning and can be replaced individually if damaged.

Three-Function Platform: Back Lift, Leg Lift, Sit-Up Position

The BCMGK-SMJ01-01 provides three independent positioning functions: back lift (0–75°), leg lift (0–45°), and a combined sit-up position achievable by raising both sections simultaneously. These three functions are the standard configuration for orthopaedic and rehabilitation ward beds and cover the principal therapeutic positions required across fracture recovery, post-arthroplasty care, and mobilisation exercise programmes.

CE Certification Under Medical Device Directive

The BCMGK-SMJ01-01 is CE-certified in accordance with the applicable Medical Device Directive, confirming compliance with safety and performance standards for inpatient hospital use. The full conformity documentation package is available from Medigear.uk and supports supplier qualification within NHS trusts and regulated private healthcare procurement frameworks.

Optional Accessories: Low-Pressure Rod, Drain, Shelf

Three optional accessories are available and can be specified at the point of order through Medigear.uk: a low-pressure rod for pressure management or traction weight support, a drain accessory for post-surgical wound drainage management, and a shelf for patient belongings or clinical supply storage within the bed frame footprint. These options adapt the bed to more complex clinical scenarios without supplementary furniture.

OEM Customisation Supported

The BCMGK-SMJ01-01 supports OEM customisation for distributors and institutional buyers, including frame colour, finish, branding, and specification modifications. The scope of customisation, minimum order quantities, and production lead times are discussed and confirmed through Medigear.uk for all trade and bulk orders.

The Grace Medy BCMGK-SMJ01-01 orthopaedic bed delivers CE-certified three-function clinical performance with a 0–75° backrest, 0–45° leg lift, stainless-steel gantry traction frame, and a 1950 × 900 mm bed surface, designed for inpatient orthopaedic wards, rehabilitation units, and paediatric traction settings. It meets the needs of NHS procurement teams, hospital network distributors, and institutional buyers seeking a standards-compliant traction platform with a comprehensive standard and optional accessory package that adapts the bed to diverse ward configurations. The full specification, optional accessory configuration, and OEM customisation options are all available to review and request through Medigear.uk. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.