233 Medical Video Processor

Product Code: GE-ESE-1920

Picture, light and air from one console

This endoscopy video processor from 233 Medical combines image processing, an 80 watt white lamp and an adjustable air pump in a single console. Electronic magnification, vascular enhancement and eleven brightness levels are all available to the operator, with two HDMI outputs and DVI for connecting displays.

Sections

Endoscopy Camera Systems & Towers

Departments Consolidating Equipment

Endoscopic examination normally draws image processing, light and air from separate boxes, each with its own connections and its own position on a stack. A console combining all three reduces that to one unit, which matters where space is constrained and where the time spent connecting equipment before a list is time that could be spent on patients. Fewer boxes also means fewer connections to check beforehand. Time spent connecting equipment is time not spent on patients.

Examinations Needing a Closer View

Four-step electronic magnification at 1.2 through 2.0 times allows a region to be examined more closely without advancing or repositioning the scope. That is useful where movement is limited or where a closer look is wanted briefly before continuing, and the step is selected and reversed by the operator at will. A closer view is available without disturbing the position held. Movement of the scope itself is sometimes genuinely limited.

Work Where Vascular Detail Matters

The vascular enhancement mode renders the image so that vascular structures appear more distinctly. It is a presentation option rather than a measurement, and clinicians apply their own judgement to what it displays. Medigear.uk can advise on the examinations for which the manufacturer intends it. Presentation modes support judgement rather than replacing it. Medigear.uk can advise on the manufacturer's intended use.

Rooms Running Two Displays

Two HDMI outputs and DVI allow a primary monitor, a second screen and a recording device to be driven together. Teaching arrangements and departments documenting their examinations both benefit from more than one output being available without adaptors or splitters in the chain. Documentation and teaching both benefit from the second output. Splitters and adaptors stay out of the arrangement entirely.

One Unit Instead of Three

Bringing image processing, illumination and air supply into a single console removes two devices from the arrangement along with their mains leads, their connections and their share of space. Setting up becomes a matter of one unit rather than three, and there is correspondingly less to check before a list and less to go wrong once it is running. Three mains connections reduce to one across the arrangement. Less stands between arriving in a room and beginning work.

Adjustment Where It Is Wanted

Eleven brightness levels, three pump settings and four magnification steps give an operator meaningful control over how the examination is conducted. Equipment offering a single fixed setting forces a compromise; equipment offering graduated adjustment lets the clinician match conditions to what is actually in front of them. Graduated adjustment suits examinations that vary considerably. Conditions differ between patients and within a single case.

Presentation Options Under Operator Control

Both vascular enhancement and electronic magnification are selected and reversed at will rather than applied automatically. That keeps the clinician deciding how the image is presented and, importantly, aware of which mode is active when they interpret what they are seeing. Knowing which mode is active matters when reading an image. Automatic application would remove that awareness entirely. Deliberate selection keeps the operator fully in charge of presentation.

Eighty Watt White LED Illumination

Lighting is built into the console at 80 watts, with colour temperature stated at 5300 kelvin or above and illumination given as 140,000 lux.

Eleven Brightness Levels

Output adjusts from zero to ten, so illumination matches the cavity being examined rather than running at one fixed level throughout a procedure. Fixed output would compromise in one direction or the other.

Four-Step Electronic Magnification

Magnification operates at 1.2, 1.5, 1.7 and 2.0 times, giving a closer view of a region without repositioning the scope to achieve it. The step is reversed as readily as it is applied.

Vascular Enhancement Mode

A selectable mode alters image rendering so vascular structures stand out more distinctly. Interpretation remains a clinical matter throughout.

Three-Level Air Pump

The integrated pump runs at strong, medium or weak settings, letting the operator match air supply to the examination rather than accepting a single rate. Nothing needs reconfiguring between the available levels.

Air Flow from 4 to 10 Litres

Flow spans 4 to 10 litres per minute across the pump's range. Which setting suits a given examination is a decision for the clinician performing it. The range covers gentle and more vigorous supply alike.

Two HDMI Outputs and DVI

Video connectivity covers two HDMI connections alongside DVI, allowing a primary display and a second screen or recorder to run together. No splitters or adaptors enter the chain to achieve that.

Three Functions in One Console

Imaging, illumination and air supply share one housing, so a department sets up one unit rather than assembling three from separate sources. One interface is learned rather than three separate ones.

This console consolidates three functions endoscopic examination usually draws from separate equipment: image processing, illumination and air supply. An 80 watt white LED rated at 5300 kelvin or above provides the light across eleven adjustable levels, while an integrated pump offers strong, medium and weak settings at 4 to 10 litres per minute.

Two image functions sit under operator control. Electronic magnification works in four steps at 1.2, 1.5, 1.7 and 2.0 times, and a vascular enhancement mode renders the picture so vascular structures appear more distinctly. Both are selected deliberately rather than applied automatically, and interpretation of what they show remains clinical.

Video connectivity covers two HDMI outputs and DVI, allowing a primary display alongside a second screen or recorder. The pump pressure figure in this documentation carries a unit that is not a recognised pressure measurement, and Medigear.uk will establish the correct reading.

Consolidating three functions leaves one interface to learn and one unit to move. No model designation appears in this documentation. Medigear.uk supplies this console as a verified medical equipment supplier and will confirm the model, supported scope types, accessory and case content, mains configuration, condition and full specification. Contact the team to discuss specification and arrange a quotation.

FAQ

Frequently Asked Questions

Everything buyers need to know about sourcing medical equipment through MediGear.

Image processing, illumination and air supply all run from the same housing. Endoscopic examination normally draws these from separate equipment, so consolidating them reduces the number of units a department sets up and connects before a list. Fewer units also means fewer mains connections to find. Space on a stack is frequently the binding constraint.

The lamp is an 80 watt white LED with colour temperature stated at 5300 kelvin or above and illumination given as 140,000 lux. Brightness adjusts across eleven levels from zero to ten during use. Adjustment happens during the examination rather than beforehand.

It enlarges the displayed image in four steps at 1.2, 1.5, 1.7 and 2.0 times, giving a closer view without the scope being advanced or repositioned. The step is selected by the operator and reversed just as easily. Nothing about the scope position needs to change to use it. Four steps cover a useful span without excessive choice.

It is a selectable rendering mode that makes vascular structures appear more distinctly in the displayed image. It changes how the picture is presented rather than measuring anything, and interpretation remains a clinical matter for the examining clinician. The operator knows which mode is active when reading the image.

The integrated pump offers strong, medium and weak settings, with air flow spanning 4 to 10 litres per minute. Which setting suits a particular examination is a decision for the clinician performing it. Settings are matched to the examination rather than fixed. The pump forms part of the same console as the imaging.

The documentation gives a figure of 30 to 60 but pairs it with a unit that is not a recognised pressure measurement. Rather than guess at what was intended, Medigear.uk will establish the correct reading before the specification is relied upon. Publishing an unverified figure would not serve a buyer well.

Two HDMI outputs and a DVI connection are fitted. That allows a primary monitor to run alongside a second display or a recording device without splitters or adaptors being introduced into the chain. Teaching and documentation both benefit from that second output. Both outputs carry the picture without further equipment.

No model designation appears in this documentation, which describes the specification without naming the unit. Medigear.uk will confirm the model, the scope types it supports and the accessory content for the system supplied. Establishing the model early avoids confusion further down the line.