Glaucoma clinics measure central corneal thickness because it influences applanation tonometry readings. The SP-3000 applies up to three programmable IOP correction formulas based on that thickness, with the bias set as a percentage. Single mode averages 10 readings, giving one settled figure for the record and printout.
Refractive and corneal surgery teams work from corneal thickness across the cornea and at its centre. Two programmable maps, each with up to 25 points, chart that thickness, and the cross-section view lays out values along a corneal incision line. Map layouts come from the map construction utility so that each site can set its own point pattern. The difference display sets one thickness measurement against another, which helps when the same cornea is measured more than once.
Day-to-day operation stays simple. MEASURE, SINGLE, and MAP start the main functions from the front panel; measurement triggers automatically with sound monitoring, and the thermal printer prints a paper record at once. Settings for sound, time and date, print mode, map construction and the cross-section view sit on the touch panel. The RS-232 port or an optional memory card then moves results on to a computer.
The probe touches the eye, so it is disinfected before use and kept under its cap when idle; remove it from service if its contact surface is damaged. An optional disposable-tip probe offers two tip shapes for sites that prefer single-use tips. The unit includes a pachymeter test piece for checking measurements, and a dust cover protects the console between clinics.



