Wonderful EVAS-S-1

The EVAS-S-1 is made for clinics and workshops that adapt patients' shoes. Podiatry practices, orthotic departments, orthopaedic footwear workshops, and limb-fitting centres all perform sole corrections. Here, they add material to a shoe to change its height or balance. The lining provides that material in a form ready to be cut and fitted.

Podiatrists and orthotists assess the patient and decide what correction a shoe needs, whether a small heel raise, a forefoot adjustment, or a larger build-up for a significant height difference. Orthopaedic shoe technicians then select the thickness, cut the layers and fit them into the sole. In hospital settings, the same work supports patients returning to walking after surgery or injury, and patients with long-term conditions affecting the feet.

Population fit is where the EVAS-S-1 earns its place. Many corrections are modest, a few millimetres at most, and the 2 to 6 mm gauges match that need closely. Other patients need a substantial raise, which the 12 mm option provides in one layer, then thinner gauges refine it. A single material therefore serves the whole caseload, from a patient needing a slight lift to one needing a pronounced build-up.

Workshops serving a steady flow of patients keep the full thickness range on hand. Because every gauge shares the same colourful EVA, technicians can mix layers in one correction and finish it consistently, case after case. Stocking the thin gauges deeply, along with the 12 mm option, covers almost any raise a referral brings in.

A gauge for small corrections

Thicknesses from 2 to 6 mm let a technician add precisely the few millimetres a modest correction needs.

Depth for larger raises

The 12 mm option supplies a substantial layer in one piece for bigger height differences.

Layers that combine

You can stack thick and thin gauges, so you can build a correction to the exact depth required.

One material across the caseload

The same EVA serves both slight and pronounced corrections, keeping stock and technique consistent.

Easy identification

The colourful finish helps staff tell thicknesses apart quickly on the shelf and at the bench.

A deliberate finish

Coloured layers give each correction a clear, intentional appearance on the finished shoe.

Cut to each shoe

As plain lining, the material can be shaped at the bench to suit any sole.

A single item number

One code covers the full thickness range, keeping ordering straightforward.

EVA material

The lining is made of EVA.

Colourful finish

The material is supplied in a colourful finish.

2 mm gauge

The thinnest option, for the finest corrections.

3 to 5 mm gauges

The middle of the thin range, for moderate adjustments.

6 mm gauge

The top of the thin range.

12 mm option

A deep layer for substantial raises.

Designed for shoe sole correction

Made specifically to correct shoe soles.

Stackable layers

Layer different thicknesses to reach a target depth.

Bench-cut format

Cut and shaped to suit each individual shoe.

Item number EVAS-S-1

One item number covers every thickness.

Single material across the range

All thicknesses share the same colourful EVA.

Produced in Hebei

Shijiazhuang Wonderfu Rehabilitation Device Technology Co., Ltd. makes the EVAS-S-1 in Hebei, China.

The EVAS-S-1 suits a podiatry practice, orthotic department or footwear workshop that corrects shoe soles across a varied caseload. Thin gauges from 2 to 6 mm handle the small raises that make up much of the work, and the 12 mm option supplies depth for larger height differences in a single layer. Because every thickness is the same colourful EVA, layers combine cleanly and stay easy to identify. One item number covers the full range, so a workshop can keep its correction stock simple. Clinics that adapt patients' everyday shoes week in, week out will get the most from it.