Sale on Manual & Electric Hospital Beds - Starting from 25 September!

MediGear Group Limited
B2B
  1. Home
  2. Shop
  3. ENT, Ophthalmic & Sensory
  4. Visionstar TF-C
✓ Certified Professional Seller Visionstar TF-C
Visionstar TF-C
Visionstar TF-C
Visionstar TF-C
Visionstar TF-C
Visionstar ENT, Ophthalmic & Sensory

Visionstar TF-C

Product Code: EOAS-OAVT-3379

One moulded front, fewer joints, less to clean.

Every clip and seam on a trial frame is somewhere grime can sit. The TF-C appears moulded as a single flat front, in grey or blue, across ten fixed sizes from 52 to 70 mm.

Sections
Trial Lens Sets & Frames
Categories
ENT, Ophthalmic & Sensory
Condition
New
Origin
China
Seller Type
Certified Professional Seller
CE & ISO Certified
Global Shipping
Supplier: Medigear
Share: Facebook LinkedIn Twitter Pinterest

The Visionstar TF-C is a fixed-PD trial frame from a family of five models, the TF-AT, TF-A, TF-C, TF-CT and TF-T, that share a single specification sheet. The sheet gives one figure for the whole family: PD options of 52, 54, 56, 58, 60, 62, 64, 66, 68 and 70 mm. It also shows the TF-C in two finishes, grey and colour, with the colour example photographed in blue.

The rest of this page describes what the photographs show, and it is flagged as such.

The TF-C looks different from its siblings. Its front appears to be a single moulded piece: a flat plate running across both eyes, with the cell rims and their printed scales formed into it, rather than separate cells joined by a bridge and fitted with visible clips. The profile is low and clean, and the temples run straight back from the front.

That construction has a practical consequence. A trial frame is handled and wiped many times a day, and every joint, clip or recess is a place where skin oil, cleaning residue and debris collect. A frame with fewer joints is quicker to clean properly and has less to work loose. For infection control in a busy clinic, that is a genuine advantage.

The trade-off is likely to be adjustability. A one-piece front leaves less room for mechanisms, so features such as adjustable nose pads or temple length, if absent, cannot be added. None of this is stated, and it is confirmed before supply.

Unpublished are the lenses per cell, weight, cell diameter, frame material, what distinguishes the TF-C from its four siblings, and whether the printed scales are axis calibration.

Infection control is the clearest case. A trial frame passes between patients all day, and one with fewer joints and recesses is easier to wipe thoroughly, which supports the cleaning standards a CQC inspection expects to see.

High-volume adult refraction suits a fixed-size frame that is quick to select and quick to clean between patients.

Shared or rotating clinics benefit from simple equipment with little to adjust or work loose, since several clinicians handle the same frames.

Domiciliary and care home work suits a frame that cleans easily away from the clinic, where facilities for thorough cleaning are more limited.

Screening sessions refracting many people at speed gain from both quick selection and quick cleaning.

Retail practices can offer the blue option where a less clinical look suits the setting.

Complex prescriptions depend on the lens capacity, which is not yet confirmed, so we establish it before recommending the frame for that work.

Patients with unusual bridge heights may be poorly served if the moulded front has no nose pad adjustment, which is confirmed before supply.

Fewer joints to clean

A one-piece moulded front leaves fewer places for residue and debris to gather.

Faster between patients

A simpler shape takes less time to wipe thoroughly, which adds up across a clinic.

Less to work loose

Fewer clips and joints mean fewer parts to loosen with repeated handling.

Low, clean profile

The flat front sits neatly and looks uncluttered.

Grey or blue

A neutral finish for clinical settings, or a colour where a friendlier look helps.

Ten fixed sizes

52 to 70 mm in 2 mm steps covers most adults and many older children.

Printed cell scales

Markings around each rim, subject to confirmation as axis calibration.

Supports infection control

Easier cleaning helps a practice meet the standards expected at inspection.

Its trade-offs stated plainly

The likely loss of adjustability and the missing specification are flagged here before ordering.

One-piece moulded front

A single flat front with the cells formed into it, as shown in the photographs.

Low profile

A slim, uncluttered frame outline.

Ten PD options

52, 54, 56, 58, 60, 62, 64, 66, 68 and 70 mm.

Grey finish

Neutral grey, as published.

Colour finish

A colour option, shown in blue. Available shades confirmed at order.

Printed cell markings

Visible around each rim. Axis calibration confirmed at order.

No interpupillary adjustment

Fixed per frame by design.

Lenses per cell

Not stated. Confirmed before supply.

Adjustable features

Not stated. Whether pads or temples adjust is confirmed at order.

Weight

Not published. Obtained before supply.

Material

Not specified. Confirmed at order, along with safe cleaning agents.

Difference from sibling models

Not stated. Confirmed in writing before supply.

The Visionstar TF-C is a fixed-PD trial frame whose front appears moulded as a single flat piece, offered in grey or blue across ten sizes from 52 to 70 mm. That construction is the argument for it: fewer joints and recesses make a frame quicker to clean between patients and give it less to work loose, which suits infection control, busy clinics and shared rooms. The likely cost is adjustability, since a moulded front leaves little room for mechanisms. The published data is a single line of PD options shared across five models, so lens capacity, weight, material, any adjustment and what separates the TF-C from its siblings all need confirming. Medigear.uk establishes each in writing. Contact the Medigear.uk team for pricing.

FAQ

Frequently Asked Questions

Everything buyers need to know about sourcing medical equipment through MediGear.

From the photographs, its construction. The TF-C appears to have a single moulded flat front, where the other models show separate cells, bridge pieces and clips. The sheet itself does not state the differences, so Medigear.uk confirms them in writing before supply.

Mainly for cleaning. Trial frames are wiped between every patient, and joints, clips and recesses trap residue that a quick wipe misses. Fewer of them means a frame that is faster to clean properly and has fewer parts to work loose over time.

Not stated on the sheet. Other Visionstar fixed-PD frames take three or four per side, and that decides whether a full prescription can be built at once. We confirm the figure before you order.

Not stated. A moulded front leaves less room for mechanisms such as adjustable nose pads or temples, so this frame may be fixed in every respect. We confirm what, if anything, adjusts.

The sheet shows grey and a colour option, photographed in blue. Whether other colours are offered, and whether colours identify sizes, is not stated. We confirm at order.

The photographs show printed markings around each rim, which usually indicates axis calibration, but the data does not say so. We confirm before you order.

Ten, from 52 to 70 mm in 2 mm steps. Patients between sizes are fitted to the nearer frame, which is acceptable at lower powers and less so at higher ones.

Not specified. A moulded front suggests a plastic or composite, but that is an inference from the photograph, not a stated fact. We confirm the material, which also determines which cleaning agents are safe.

Not published. A one-piece moulded frame may well be light, but we obtain the figure rather than assume it.

Not published. Trial lenses are commonly 38 mm, and the frame must match the set you own. We confirm the cell diameter before you order.

A trial frame is generally a Class I medical device under the UK Medical Devices Regulations 2002. Medigear.uk confirms CE marking, the declaration of conformity and UKCA status at quotation.

Wipe the frame between patients with an approved agent, which is quicker on a one-piece front than on a jointed one. Keep the cells free of lens debris, check for cracks in the moulding, and store frames by size. Typical warranty is 12 months, confirmed at quotation.