Visionstar LE-310P

The LE-310P is aimed at optical practices and laboratories whose order book includes a steady share of polycarbonate. Polycarbonate is used for safety eyewear, sports spectacles and children's glasses, and an independent optical practice that dispenses these can edge them in-house on the dedicated PC wheel, with glass handled on its own wheel beside it.

Optical technicians and glazing staff start each day with the size correction already done. Because the machine corrects itself at start-up, left and right lenses come out uniform from the first job, and staff can move straight on to edging.

The four wheels split the work clearly. Polycarbonate and glass are roughed separately, the V-groove wheel forms a pointed bevel for full-rim frames, the polishing wheel finishes a polished bevel, and a flat band edge is available for frames that need one. The lens range of 22 to 100 mm also covers larger lenses for wide frame shapes.

Optical laboratories that receive mixed PC, CR and glass orders from several practices can use the LE-310P as a general station, keeping polycarbonate on its own wheel within the same machine.

Hospital eye departments and eye clinics with an on-site glazing room can use it to complete spectacles for patients, including polycarbonate lenses for children and safety use.

Eyewear retailers with a workshop serving several branches can install the edger on one bench with its tank alongside, on a 220 V, 50 Hz supply, and process all three lens materials at one station. The clear dome lets staff follow each lens through the cycle.

A wheel for polycarbonate

The dedicated 100 × 15 mm PC wheel processes polycarbonate on a wheel of its own.

Glass kept separate

A 100 × 16 mm glass wheel sits beside the PC wheel.

Three lens materials

PC, CR and glass are all listed for processing.

Correction at every start-up

The edger corrects itself automatically each time it is switched on.

Uniform pairs

Left and right lenses are cut to a uniform size.

Three edge types

Pointed V-bevel, flat band and polished bevel.

Wide lens range

From 22 mm up to 100 mm.

Water from its own tank

A separate tank, pump and hoses supply the chamber.

PC wheel

100 × 15 mm.

Glass wheel

100 × 16 mm.

V-groove wheel

100 × 23 mm, forming pointed edges.

Polishing wheel

100 × 11 mm, for polished bevels.

Automatic correction system

Runs at start-up for uniform left and right lens sizes.

Processing types

Pointed edge, flat band, bevel polishing.

Lens materials

CR, glass and PC.

Lens range

22 mm to 100 mm.

Water tank and pump

Separate tank with hoses to the chamber.

Clear dome

Covers the chamber, marked with PC lettering.

Electrical supply

220 V ±10%, 50 Hz, drawing 500 W.

Dimensions and weight

510 × 490 × 400 mm and 51 kg.

The LE-310P suits an optical practice, laboratory or eye clinic that edges polycarbonate regularly alongside CR and glass. Practices dispensing safety, sports and children's spectacles, laboratories with mixed material orders and multi-branch workshops will gain the most. Its strength is a dedicated 100 × 15 mm PC wheel beside a separate glass wheel, backed by automatic correction at every start-up for uniform left and right sizes. V-groove and polishing wheels add pointed, flat band and polished bevel edges across 22 to 100 mm. The machine runs on 220 V at 50 Hz, measures 510 × 490 × 400 mm and weighs 51 kg.