SOCO SCD07

The SCD07 suits dental and surgical teams that work at an operating microscope and want a chair that moves with the operator. SOCO lists it as a microscope doctor chair for the person at the eyepieces, who sits close to the instrument for long sessions. SOCO itself builds microscopes for dental and surgical treatment.

The armrests rotate four ways, front-to-back and left-to-right, so forearms can rest where the work calls for. A foot pedal adjusts the seat and backrest, letting the operator change position without putting down an instrument. SOCO describes all-around support and a design that follows the body's lines.

A gas lift moves the seat through a 120-140 mm stroke, and the picture marks seat heights of 490 mm and 630 mm. The cushion measures 470 × 450 mm and the backrest 380 × 250 mm, giving the operator a wide seat and a tall backrest to lean against. SOCO says the chair helps the operator keep the trunk well supported during treatment.

The polished base is 600 mm across, and it rolls on 50 mm diameter casters, allowing the chair to move between positions around the microscope. Ultra-fine fibre leather covers the seat over high-resilience foam. The load capacity is 150 kg, and the gross weight is 24 kg.

The seat, backrest, and armrest sizes are listed in the specification table, so a department can check them before ordering. A department fitting out a treatment room can order the chair under the code SCD07.

Four-way armrests

The armrests rotate front-to-back and left-to-right. SOCO says they provide comfortable arm support.

Foot pedal control

A foot pedal adjusts the seat and backrest. Both hands stay free for the work.

All-around support

SOCO describes all-around support from the chair. The design follows the body's lines.

Gas lift height setting

The gas lift moves the seat through 120 to 140 mm. The operator sets the height to the eyepieces.

Tall backrest

The backrest measures 380 × 250 mm. The picture shows it curving around the sides.

Wide seat cushion

The cushion measures 470 × 450 mm. It gives a broad place to sit.

Wide polished base

The base is 600 mm across. 50 mm diameter casters sit beneath it.

150 kg load capacity

The seat carries a load of up to 150 kg. The chair weighs 24 kg.

Leather and foam seat

Ultra-fine fibre leather covers high-resilience foam. A plastic board sits beneath them.

Microscope doctor chair

SOCO lists the chair under the range name Microscope Doctor Chair. The order code is SCD07.

Rotating armrests

The armrests rotate four ways. They move front-to-back and left-to-right.

270 × 100 mm armrests

Each armrest measures 270 × 100 mm. The picture shows them in white.

Foot pedal

The pedal sits at the base. It adjusts the seat and backrest.

Adjustable backrest

The backrest changes position with the pedal. It measures 380 × 250 mm.

Adjustable seat

The seat changes position with the pedal. The cushion measures 470 × 450 mm.

Ultra-fine fibre leather

Leather of this kind covers the seat. The picture shows it in orange.

High-resilience foam

Foam sits inside the seat. A plastic board lies beneath it.

Gas lift stroke

The stroke runs from 120 to 140 mm. It sets the height of the seat.

Marked seat heights

The picture marks heights of 490 mm and 630 mm beside the chair. They sit within the stroke of the lift.

600 mm base

The base is 600 mm across. It is polished in the picture.

50 mm casters

The casters measure 50 mm in diameter. They roll the chair between positions.

150 kg seat load

The seat load capacity is 150 kg. The chair's gross weight is 24 kg.

Packing size

The carton measures 590 × 560 × 470 mm. The packing volume is about 0.16 m³.

The SCD07 suits dental and surgical teams that want a chair with rotating armrests and pedal control for work at an operating microscope. It features a 470 × 450 mm seat, a 380 × 250 mm backrest, four-way rotating armrests, and a 120-140 mm gas lift. It carries a load of up to 150 kg under the order code SCD07.

SOCO lists the chair for use with its dental surgical microscopes and describes its ergonomic, all-around support. This makes the SCD07 a practical fit for departments that want the operator seated and supported at a height that suits the microscope. A buyer quotes the order code when ordering.