SOCO SCD06

The SCD06 suits dental and surgical teams who sit at an operating microscope and want a chair built around a riding posture. SOCO says this posture comes closest to standing and creates a 135-degree angle between the hips and knees. The saddle shape of the seat produces that posture, and the operator sits with their legs apart on either side.

A gas lift moves the seat 120 to 180 mm so the operator can match the eyepieces' height; the picture marks heights of 480 mm and 640 mm. The backrest measures 400 × 260 mm and provides a back support. The two armrests (270 × 100 mm) support the forearms, and a foot ring above the base gives the feet a place to rest.

50 mm diameter casters let the operator move the chair around the microscope, and the 560 mm base spreads the weight across the floor. PU leather covers the foam and moulded board of the seat; the picture shows a black seat with black armrests. The marked heights span 160 mm, so the lift covers 480-640 mm. The load capacity is 150 kg, and the gross weight is 11 kg.

SOCO builds microscopes for dental and surgical treatment, and it lists the chair under the range name Microscope Doctor Chair for the person working at one. A department fitting out a treatment room can compare the figures in the specification table before ordering.

The order code is SCD06.

Riding posture

The seat provides a riding posture closest to standing. SOCO states a hip-knee angle of 135 degrees.

Saddle-shaped seat

The seat has a saddle shape. The operator sits with the legs on either side.

Gas lift height setting

The gas lift moves the seat through 120 to 180 mm. The operator sets the height to the eyepieces.

Armrests on both sides

Two armrests of 270 × 100 mm sit at the sides. They carry the forearms.

Supportive backrest

The backrest measures 400 × 260 mm. It gives the back something to lean against.

Foot ring

A foot ring circles the column above the base. It gives the feet a place to rest.

Casters for moving

50 mm diameter casters sit beneath the base. The chair moves between positions around the microscope.

150 kg load capacity

The seat carries a load of up to 150 kg. The chair weighs 11 kg.

PU leather and foam

PU leather covers foam on the seat. A moulded board sits inside.

Microscope doctor chair

SOCO lists the chair under the range name Microscope Doctor Chair. The order code is SCD06.

Riding posture

The posture comes closest to standing. The angle between hips and knees is 135 degrees.

Saddle seat

The seat is saddle-shaped. The picture shows it covered in black PU leather.

400 × 260 mm seat cushion

The cushion measures 400 × 260 mm. Foam sits beneath the leather.

Injection-moulded board

A board sits inside the seat. It is injection-moulded.

400 × 260 mm backrest

The backrest measures 400 × 260 mm. It rises behind the seat.

270 × 100 mm armrests

Each armrest measures 270 × 100 mm. The picture shows them in black with pads.

Gas lift stroke

The stroke runs from 120 to 180 mm. It sets the height of the seat.

Marked seat heights

The picture marks heights of 480 mm and 640 mm beside the chair. They sit within the stroke of the lift.

Foot ring

The ring circles the column above the base. It is silver in the picture.

560 mm base

The base is 560 mm across. It carries the whole chair.

50 mm casters

The casters measure 50 mm in diameter. They roll the chair between positions.

150 kg seat load

The seat load capacity is 150 kg. The chair's gross weight is 11 kg.

Packing size

The carton measures 560 × 570 × 290 mm. The packing volume is about 0.09 m³.

The SCD06 suits dental and surgical teams that want a saddle-seat chair for work at an operating microscope. It features a riding posture with a 135-degree hip-knee angle, a 400 × 260 mm seat cushion, armrests, and a 120-180 mm gas lift. It carries a load of up to 150 kg under the order code SCD06.

SOCO lists the chair for work at its dental surgical microscopes and describes a posture that comes closest to standing. This makes the SCD06 a practical fit for departments that want the operator seated at a height that suits the microscope. A buyer quotes the order code when ordering.