SOCO SCD05

The SCD05 suits dental and surgical teams who work at an operating microscope, where the person at the eyepieces sits close to the instrument for long periods. SOCO lists it as a microscope doctor chair, and its own microscopes are built for dental and surgical treatment. The chair gives the operator a place to sit that can be set to the work height.

The gas lift moves the seat through a 120-180 mm stroke, so the operator can raise or lower it to meet the eyepieces. The seat rotates, which lets the operator turn toward an assistant or an instrument tray without standing. SOCO describes the design as spreading the weight of the sitting person and reducing pressure on the thighs.

The backrest measures 400 × 260 mm and supports the seated person's back, while the two armrests, 270 × 100 mm, support the forearms. A foot ring on the column gives the feet a place to rest when the seat is raised. The 560 mm base rolls on 50 mm casters so that the chair can be moved between positions around the microscope.

The seat is covered in ultra-fine fibre leather and has high-resilience foam inside. It has a load capacity of 150 kg, and the chair's gross weight is 9.8 kg. A department can read the seat, backrest and armrest sizes in the specification table before choosing.

A department fitting out a treatment room can order the chair under the model code SCD05.

Rotating seat

The seat rotates. The operator turns toward the work without standing.

Weight distribution

SOCO describes the design as spreading the user's weight. The seat is shaped to reduce pressure on the thighs.

Gas lift height setting

The gas lift moves the seat through 120 to 180 mm. The operator sets the height to the eyepieces.

Armrests on both sides

Two armrests of 270 × 100 mm sit at the sides. They carry the forearms.

Supportive backrest

The backrest measures 400 × 260 mm. It supports the person's back.

Foot ring

A foot ring surrounds the column above the base. It gives the feet a place to rest.

Casters for moving

50 mm diameter casters sit under the base. The chair moves between positions around the microscope.

150 kg load capacity

The seat supports up to 150 kg. The chair weighs 9.8 kg.

Leather and foam seat

Ultra-fine fibre leather covers high-resilience foam. A plastic board sits beneath them.

Microscope doctor chair

SOCO lists the chair under the range name Microscope Doctor Chair. The model code is SCD05.

Rotating seat

The seat rotates on the column. It lets the operator face a new direction.

445 × 400 mm seat cushion

The cushion measures 445 × 400 mm. It sits on a plastic board.

High-resilience foam

Foam sits inside the seat. The leather covers it.

Ultra-fine fibre leather

The covering is ultra-fine fibre leather. The picture shows it in cream.

400 × 260 mm backrest

The backrest measures 400 × 260 mm. It rises behind the seat.

270 × 100 mm armrests

Each armrest measures 270 × 100 mm. The picture shows them in black.

Gas lift stroke

The stroke runs from 120 to 180 mm. It sets the height of the seat.

Marked seat heights

The picture marks heights of 485 mm and 610 mm beside the chair. They fall within the lift's height.

Foot ring

The ring surrounds the column above the base. It gives the feet a place to rest.

560 mm base

The base is 560 mm across. It is silver in the picture.

50 mm casters

The casters measure 50 mm in diameter. They roll the chair between positions.

150 kg seat load

The seat load capacity is 150 kg. The chair's gross weight is 9.8 kg.

Compact packing

The chair is packed in a 560 × 570 × 290 mm carton. The packing volume is about 0.09 m³.

The SCD05 suits dental and surgical teams that want a rotating chair for work at an operating microscope. It has a 445 × 400 mm seat, a 400 × 260 mm backrest, two armrests, and a 120-180 mm gas lift, and it carries a load of up to 150 kg under model code SCD05.

SOCO lists the chair for work at its dental surgical microscopes and describes a design that spreads weight and reduces pressure on the thighs. This makes the SCD05 a practical fit for departments that want the operator seated at a height that suits the microscope. A buyer quotes the model code when ordering.