Roundfin RD-E Pro

In tertiary-care hospital mortuary placements where the standard RD-E specification doesn't meet procurement requirements, the RD-E Pro delivered through Medigear.uk supports six-body holding with integrated audit-trail, infection-control, and security upgrades that trust-level governance frameworks increasingly require. NHS Estates teams specifying the RD-E Pro typically deploy it to teaching hospital trusts, forensic pathology centres, and regional referral mortuaries where the USB temperature record system, heavy-duty mechanical locks, and door-frame heating provide measurable operational advantages over standard-tier equipment.

In pathology and coronial workflows operating under CQC and HTM 20-04 governance, the RD-E Pro's separated thermometer button per chamber supports independent temperature verification without disturbing the primary controller, generating audit-trail evidence that the standard RD-E cannot provide. The dedicated compressor controller manages intelligent compressor staging to reduce power-cycling stress on the six-compressor array, extending service life and reducing aggregate energy draw over multi-year operation.

For forensic pathology centres, university anatomy departments, and large funeral services groups where infection control, dignity, and chain-of-custody documentation are procurement-determining requirements, the RD-E Pro delivered through Medigear.uk provides integrated drain plumbing for wash-down infection control, LED chamber lighting for viewing-room workflows, and heavy-duty locks for secure body holding. The Pro feature set is designed for placements where the standard RD-E would require multiple add-on orders.

In mass-fatality, pandemic, and resilience-critical contingency scenarios where audit-trail evidence and infection-control documentation are required from day one, Medigear.uk supplies the RD-E Pro to regional coronial overflow teams and trust contingency stores. The door-frame heating prevents seal degradation during sustained cold-room operation, the door-mounted USB temperature-recording system generates continuous audit evidence, and the dedicated compressor controller supports unattended overnight operation across resilience-critical placements.

Heavy-Duty Mechanical Lock Upgrade Over Standard RD-E

The RD-E Pro replaces the standard key-cylinder lock with a heavy-duty rotating lever mechanism on each of the six chamber doors. The upgrade supports higher-frequency access cycles typical at tertiary-care mortuary scale, reduces lock failure rates over multi-year operation, and provides a more secure dignity and chain-of-custody barrier for forensic pathology workflows. Medigear.uk stocks UK replacement lock cylinders and lever assemblies for next-working-day dispatch under warranty.

Integrated Door-Frame Anti-Condensation Heating

Door-frame heating elements built into each of the six chamber door frames prevent frost build-up and seal degradation under sustained cold-room operation — eliminating the slow seal-failure mode that requires reactive seal-belt replacement on standard units. The Pro tier addresses the design-level cause rather than the symptom. The heating element is field-replaceable, and Medigear.uk stocks UK spares for next-working-day dispatch.

Door-Mounted USB Temperature Record System as Standard

The Pro tier ships with a door-mounted USB temperature record system as standard — continuous logging of chamber temperature data from all six controllers to USB storage. HTM 20-04 aligned audit evidence is generated without manual transcription, supporting CQC inspection review with retrospective temperature data and providing chain-of-custody documentation for coronial workflows. Standard RD-E offers USB recording as an optional add-on at an extra order-line cost.

Separated Thermometer Button Per Chamber

Each chamber has its own thermometer button — a dedicated, independent temperature-verification access point separate from the primary digital controller. Mortuary staff and CQC inspectors can verify chamber temperature without disturbing the primary controller setpoint, providing audit-trail evidence at trust-level governance scrutiny that the standard RD-E cannot provide without separate add-on instrumentation.

Dedicated Compressor Controller for Intelligent Staging

The Pro tier ships with a dedicated compressor controller — a separate intelligent management unit for the six-SECOP compressor array providing staged start-up, load-balanced operation, and fault-isolation logic. The controller reduces simultaneous start-up current draw at first power-up, extends compressor service life through load-balanced cycling, and supports rapid fault diagnostics during F-Gas qualified engineer service visits at trust-level maintenance schedules.

LED Lighting and Drain Plumbing Integrated as Standard

LED interior lighting and integrated drain plumbing ship as standard on the Pro tier — features supplied as optional add-ons on the standard RD-E at extra order-line cost. LED chamber lighting supports viewing-room workflows and family-attended identification; integrated drain plumbing supports wash-down infection-control protocols required at forensic pathology and CQC-inspected mortuary sites. Both features are available from day one rather than requiring a retrofit later.

CE Certified and ISO 9001 Manufactured for Tertiary-Care Procurement

The RD-E Pro ships with CE marking under the EU Medical Device Regulation framework, ISO 9001 quality-system manufacturing, IEC 60601-1 electrical safety, and IEC 60335-2-89 commercial refrigeration compliance. The documentation matches the standard RD-E plus additional Pro-tier feature certifications, supporting NHS Estates procurement at tertiary-care scale, CQC inspection evidence, HTM 20-04 mortuary refrigeration capacity audit, and trust-level coronial service framework requirements.

Same Cabinet Footprint as Standard RD-E for Drop-In Upgrade

The RD-E Pro shares the same 2060 × 1580 × 1975 mm cabinet footprint as the standard RD-E, exactly, meaning trusts upgrading from RD-E to RD-E Pro require no re-survey of the destination room, no doorway re-assessment, and no ceiling-clearance re-verification. The Pro tier is a drop-in upgrade within the same footprint envelope, supporting phased fleet upgrades across multi-site trust mortuary networks without operational disruption.

Verified Supplier OEM and Tertiary-Care AMC Support

Medigear.uk offers verified supplier OEM rebranding, sample approval, and bulk-order coordination for distributor partners purchasing the RD-E Pro into tertiary-care equipment frameworks. AMC support is available through Medigear.UK's F-Gas qualified engineer network for distributor-route placements requiring ongoing service cover. Government Supply Ready documentation supports public-sector tender response at tertiary-care procurement scale across NHS, coronial, and university anatomy procurement frameworks.

Six Refrigeration Chambers Arranged in 2×3 Grid Configuration

The RD-E Pro holds six front-opening refrigeration chambers arranged in a 2×3 grid within the 2060 × 1580 × 1975 mm cabinet — two chambers wide and three chambers tall. Each chamber is accessed through its own heavy-duty locked door and accepts one 1940 × 580 mm body tray rated to 200 kg.

Six Germany SECOP Brand Compressors With Dedicated Controller

Refrigeration is delivered by six SECOP-brand compressors (Danfoss-owned Secop SC range), one per chamber, mounted on the top of the cabinet under a dedicated compressor controller that manages intelligent staged start-up, load-balanced cycling, and fault-isolation logic. Published compressor service life is 8–10 years, with a SECOP 5-year extended manufacturer warranty.

Heavy-Duty Mechanical Lock Per Chamber Door

Each of the six chamber doors carries a heavy-duty rotating lever mechanical lock — an upgrade over the standard key-cylinder lock on the RD-E and smaller siblings. The robust mechanism supports higher-frequency access cycles and strengthens dignity and chain-of-custody protections.

Door-Frame Anti-Condensation Heating

Each chamber door frame integrates an anti-condensation heating element to prevent frost build-up and seal degradation under sustained cold-room operation. The heating elements are field-replaceable, and Medigear.uk stocks UK spares.

Separated Thermometer Button Per Chamber

Each chamber has a dedicated thermometer button for independent temperature verification — supporting CQC and HTM 20-04 audit-trail evidence generation without disturbing the primary digital controller setpoint.

Door-Mounted USB Temperature Record System

Continuous USB temperature logging from all six chamber controllers, supporting retrospective audit evidence retention, CQC inspection review, and chain-of-custody documentation for coronial workflows. Ships as standard on the Pro tier rather than as an optional add-on.

Integrated LED Interior Lighting

LED chamber lighting ships as standard on the Pro tier, supporting viewing-room workflows, family-attended identification, and routine staff body-handling tasks across all six chambers.

Integrated Drain Plumbing for Wash-Down Infection Control

Built-in drain plumbing ships as standard on the Pro tier, supporting wash-down infection-control protocols required at forensic pathology and CQC-inspected mortuary sites.

Independent Digital Temperature Controller Per Chamber

Six digital LED controllers are mounted on the front of the cabinet, one per chamber, displaying current temperature, setpoint, and alarm status. Each operates fully in parallel across the +5 °C to -15 °C adjustable range with ±1 °C accuracy.

R452A Refrigerant as Standard

The Pro tier specifies R452A refrigerant as standard across all six SECOP compressors, rather than the dual R404A/R452A specification or optional R134A on the standard RD-E. R452A has a lower global warming potential than R404A under IEC 60335-2-89 commercial refrigeration compliance.

Factory Temperature Setting: 0 °C to -10 °C, Adjustable +5 °C to -15 °C

The unit ships pre-configured at the standard 0 °C to -10 °C body-holding range across all six chambers, with an adjustable range of +5 °C to -15 °C per chamber under digital control, without cross-chamber thermal coupling.

Temperature Accuracy: ±1 °C

Chamber temperature is held within ±1 °C of controller setpoint across the full operating range, matching all Roundfin sibling units for consistent audit-trail stability.

Body Tray Load Capacity: 200 kg Per Tray (1200 kg Total)

Each of the six 1940 × 580 mm body trays carries a static and dynamic working load of 200 kg. Total combined capacity is 1200 kg across the six trays.

1940 × 580 mm Universal Body Tray Dimension

Body trays measure 1940 × 580 mm — Roundfin's universal dimension is shared across the full mortuary refrigerator range, lifting trolleys, and walk-in racks. Straight-through body transfer between equipment without re-handling.

304 Stainless Steel Cabinet Construction With 100 mm Urethane Insulation

Cabinet, body trays, and internal door surfaces are 304 stainless steel — outer skin 1.0 mm, body trays 1.0 mm, inner cabinet 0.6 mm — with 100 mm foamed-in-place environmental urethane insulation using non-CFC blowing agent.

Four Braked Universal Castors and Standard 220 V Mains Operation

Four braked castors support unit mobility during commissioning and room reconfiguration. The unit operates on standard UK 220–240 V 50 Hz single-phase mains at 1680 W / 1.2 A. A 110 V / 60 Hz international variant is available for order through Medigear.uk for export placements.

The Roundfin RD-E Pro mortuary refrigerator supplied through Medigear.uk delivers the Pro-tier specification of the six-body 2×3 grid platform — adding heavy-duty mechanical locks, integrated door-frame heating, standard LED lighting, built-in drain plumbing, dedicated compressor controller, separated thermometer button, and door-mounted USB temperature record system across the same compact cabinet footprint as the standard RD-E. The independent six-compressor design protects against full equipment failure. The Pro-tier feature set addresses tertiary-care audit-trail and infection-control requirements that smaller add-on packages can't. The universal Roundfin tray dimension integrates the unit with mortuary lifting trolleys and walk-in racks during throughput peaks. With CE marking, ISO 9001 manufacturing, IEC compliance, six SECOP compressors, R452A refrigerant, full 304 stainless steel construction, and Medigear.UK MHRA importer routing, the RD-E Pro meets NHS Estates procurement, distributor framework, and direct funeral business requirements. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.