ROUNDFIN RD-907S-N

Hospital pathology departments are the primary clinical deployment setting for the RD-907S-N, where the 1800 mm work surface length and dual-sink drainage configuration directly address the throughput and contamination-control demands of high-volume surgical specimen grossing. The overflow alarm on the large waste liquid bucket reduces the risk of uncontrolled formalin spills during fixation-heavy sessions, directly supporting compliance with COSHH regulations governing formaldehyde exposure in occupied laboratory spaces and reducing the governance burden associated with reportable exposure incidents. NHS trust pathology departments and hospital procurement leads seeking a standards-compliant, documentation-ready grossing station can access CE and ISO certification packs, technical specifications, and bulk pricing through Medigear.uk.

Academic and university research institutions constitute a second major application environment for the ROUNDFIN RD-907S-N Grossing Station, where the combination of an integrated monitor stand, keyboard holder, writing board, and GFCI-protected electrical outlets creates an inline documentation workstation that eliminates the need for a separate data-entry terminal adjacent to the dissection area. Research programmes that require macroscopic image capture for digital pathology, grant reporting, or ethics documentation workflows benefit from the station's instrument and peripheral accommodations without aftermarket adaptation. The liftable tool rack's 0–400 mm adjustability supports the varied container and equipment configurations that change between experimental series in active research laboratories. Institutions evaluating the RD-907S-N for laboratory fit-out should request technical drawings and lead time confirmation from Medigear.uk.

Forensic pathology units and medico-legal laboratories represent a third established use setting for the RD-907S-N, where the station's 304 stainless steel construction, dual-drain waste segregation, magnetic instrument tool bar, and GFCI-protected electrical infrastructure meet the heightened decontamination, instrument accountability, and electrical safety requirements of post-mortem and medico-legal examination environments. The left-side magnetic toolbar supports instrument-count protocols during examination, and the detachable table plates allow removal for autoclave sterilisation after high-risk cases. Facilities specifying grossing stations for forensic or mortuary environments should discuss the RD-907S-N's configuration options and site-specific requirements with the Medigear.uk team before placing an order.

Private diagnostic laboratories, independent histopathology services, and specialist clinical laboratories represent a fourth procurement segment for the RD-907S-N — particularly where growing case volumes require a longer, more feature-complete grossing station than entry-level alternatives, and where CE and ISO certification is required to satisfy commissioning client, insurer, or accreditation body requirements. The availability of ODM and OEM customisation makes the station accessible to distributors and laboratory equipment resellers, enabling them to build a branded product range within the pathology sector. Individual buyers and small laboratory operators can access product specifications, procurement guidance, and expert support directly through Medigear.uk without requiring a minimum order commitment.

1800 mm Work Surface Accommodates Complex Multi-Organ Cases Without Instrument Crowding

The RD-907S-N's 1800 mm length provides a substantially larger working area than standard compact grossing stations, allowing pathologists to lay out large resection specimens, multiple tissue cassette trays, specimen containers, and dissection instruments simultaneously without the workspace congestion that impairs efficient gross examination. Reduced crowding lowers the risk of cross-contamination between specimens and minimises the procedural interruptions — instrument retrieval, container repositioning — that extend session duration and fatigue. For high-throughput pathology departments managing surgical lists with frequent complex cases, the extended surface length directly impacts throughput efficiency and operator comfort. The RD-907S-N's dimensions can be confirmed and compared against existing bay layouts by the Medigear.uk procurement team before order commitment.

Dual Under-Counter Sink System Segregates Formalin Waste from Clean Drainage

The two-sink configuration separates formalin-contaminated waste fluid — collected in the large sink's overflow-alarmed waste bucket — from clean instrument rinse and washdown water draining through the small sink's direct sewer connection. This physical segregation aligns with COSHH best-practice guidance for formalin waste management in clinical laboratories, reduces the risk of contaminated fluid entering the clean drainage stream, and simplifies the audit trail for compliance with biological waste disposal. The overflow alarm on the waste bucket provides an audible warning before capacity is reached, giving operators time to manage the waste stream without triggering a spill event. Procurement officers and laboratory managers reviewing the RD-907S-N for COSHH compliance alignment can access the full technical waste system documentation from Medigear.uk.

Liftable 0–400 mm Material Rack Eliminates the Need for Supplementary Reagent Shelving.

The integrated, liftable,e and detachable multifunctional material rack provides 400 mm of vertical adjustment and full removability, allowing the rack to serve as an elevated reagent shelf, specimen staging area, or cassette tray holder — then be dropped to bench level or removed entirely when the procedure requires unobstructed overhead access to large specimens. This eliminates the need for a separate reagent shelving unit in the laboratory bay, reducing capital expenditure and floor space consumption. The rack's detachability enables thorough decontamination without requiring the entire station to be taken out of service, which is a meaningful operational advantage in high-throughput departments where grossing station downtime directly impacts reporting turnaround. Medigear.uk can confirm rack dimensions and load specifications on request.

GFCI-Protected Duplex Outlets Make the Station Safe for Wet Laboratory Electrical Use

Multiple hidden duplex GFCI-protected electrical outlets are distributed throughout the RD-907S-N, enabling cameras, dictation devices, digital pathology hardware, and additional tools to be powered directly at the bench without the need for unprotected extension leads in a wet environment. GFCI protection — which cuts power within milliseconds of detecting a ground fault — is the recognised engineering control for electrical safety in wet laboratory settings and is required under most applicable building regulations and laboratory safety standards. The hidden outlet design prevents interference with surface cleaning and disinfection routines, maintaining electrical safety across the full cleaning cycle. Institutional buyers procuring the RD-907S-N for regulated laboratory environments will find the GFCI specification directly relevant to their electrical safety risk assessments.

Integrated Documentation Station Supports Digital Pathology and LIS Connectivity

The RD-907S-N is unique among basic grossing stations in providing a monitor stand, keyboard stand, and writing board as standard components, enabling the workstation to function simultaneously as a documentation terminal without requiring a secondary desk or trolley adjacent to the dissection area. This inline documentation capability reduces the distance — and the associated risk of specimen identification error — between gross examination, measurement, dictation, and data recording. The GFCI-protected outlets support connecting a high-resolution camera for macroscopic specimen imaging within the same workspace footprint. For departments implementing or expanding digital pathology programmes, the RD-907S-N's built-in documentation infrastructure reduces integration costs compared with stations that require aftermarket modifications. The Medigear.uk team can advise on compatible digital pathology peripherals for use with the station.

Magnetic Instrument Tool Bar Supports Organised Dissection and Instrument Count Compliance

The left-side magnetic instrument toolbar holds dissection forceps, scissors, probes, and rulers within the operator's immediate reach without occupying work surface space, maintaining an organised instrument layout throughout the grossing session. In departments that operate formal instrument count protocols — particularly those aligned with surgical pathology quality management systems — the toolbar provides a defined instrument location to support end-of-session accountability checks. The stainless steel-compatible magnetic surface is resistant to the disinfectants used in standard laboratory cleaning protocols and requires no mechanical maintenance or recalibration. Individual laboratory buyers and small diagnostic services will find the toolbar a practical workflow benefit that larger, more expensive stations rarely include as standard.

CE and ISO Certification Clears the Procurement Compliance Threshold for Regulated Buyers

CE and ISO certification of the RD-907S-N satisfies the standards-compliance requirement that serves as a gatekeeping criterion in NHS trusts, hospital groups, universities, and regulated private laboratory procurement frameworks. Without these certifications, a grossing station cannot enter the formal capital equipment approval process in most regulated procurement environments — making them a non-negotiable baseline for institutional buyers. The full certification documentation set is available directly through Medigear.uk, eliminating the administrative burden of sourcing compliance evidence independently from a non-English-speaking manufacturer. ODM and OEM customisation is accepted without affecting the core station's base certification status.

Hands-Free Water Control Reduces Cross-Contamination Risk During Active Specimen Handling

The combination of wrist-blade faucet handles and foot-pedal water control on the RD-907S-N provides two independent hands-free water activation modes, both of which reduce the risk of cross-contamination between gloved hands and faucet control surfaces during active dissection. This dual hands-free capability exceeds the single-mode hands-free provision of many comparable grossing stations. It is particularly relevant in departments that operate enhanced infection-prevention protocols or handle high-risk biological material. The swing-spout faucet and 6.5-foot hand spray together provide flexible water delivery coverage across the full 1800 mm surface without requiring the operator to reposition. Medigear.uk can provide plumbing specification documentation for facilities contractors coordinating water supply connections during installation.

ODM and OEM Availability Supports Distributor Branding and Multi-Site Volume Procurement

The manufacturer's confirmed acceptance of ODM and OEM orders makes the RD-907S-N a viable platform for laboratory equipment distributors, healthcare procurement groups, and specialist resellers seeking to build a branded or volume-configured product range. Configuration options available through the ODM route include adjusted dimensions, modified standard part selections, branded labelling, and customised digital integration. B2B buyers negotiating multi-unit supply arrangements for hospital networks or research infrastructure programmes should contact the Medigear.uk procurement team, which manages ODM coordination and bulk pricing directly with the manufacturer. The Medigear.uk team can issue formal quotations and ODM terms packs on request.

Minimum Rack Height: 0 mm (Fully Lowered / Detachable)

At its fully lowered position, the multifunctional material rack sits flush with the bench or at bench level, providing maximum unobstructed vertical clearance above the work surface for examination of large organ resections or overhead imaging of specimens. The rack is also fully detachable at this position, allowing it to be removed entirely when the workspace configuration demands an uninterrupted flat surface. This zero-height detach position is not available on fixed-shelf grossing stations, making the RD-907S-N's rack system a meaningful ergonomic differentiator.

Maximum Rack Height: 400 mm (Fully Elevated)

At its maximum elevated position, the liftable rack provides 400 mm of clearance above the base work surface — sufficient to stage multiple rows of specimen jars, cassette trays, and reagent containers at an accessible height above the dissection zone. The 400 mm upper limit accommodates the tallest standard reagent containers used in histopathology practice without requiring the operator to reach above comfortable arm height. Departments managing complex multi-specimen cases with large reagent sets will find the elevated rack position reduces bench congestion and improves workflow organisation. Medigear.uk can provide load capacity data for the rack at maximum elevation on request.

Total Rack Adjustment Range: 0–400 mm (Liftable and Detachable)

The 400 mm total vertical travel of the material rack — combined with full detachability — provides the most flexible storage configuration of any fixed component on the RD-907S-N. The adjustment is designed to accommodate the varied staging and storage requirements that vary across case types, specimen sizes, and operator preferences at a shared grossing station. Rack position can be set independently of all other station adjustments, allowing it to be optimised for each session without affecting the work surface height or water system configuration.

Overall Station Dimensions: L1800 × W1500 × H700 mm (Adjustable)

The RD-907S-N's 1800 mm length makes it one of the longer single-station grossing platforms in the ROUNDFIN series, accommodating the extended instrument, container, and documentation layouts required for complex surgical pathology cases. The 1500 mm depth provides generous front-to-back workspace for specimen staging at the rear, active dissection at the midpoint, and instrument access at the front — without requiring the operator to reach uncomfortably across the bench. Height is adjustable within the station's configuration range, and exact height adjustment parameters should be confirmed with the Medigear.uk procurement team for department-specific ergonomic planning.

304 Stainless Steel Construction Throughout

The entire frame, work surface, rack system, sink housings, and structural elements of the RD-907S-N are fabricated from 304 grade stainless steel, providing the corrosion resistance, surface cleanability, and mechanical durability required for sustained exposure to formalin, biological material, disinfectants, and cleaning agents in a professional laboratory environment. The monolithic stainless-steel construction eliminates the risks of laminate, paint, or composite surface delamination that can create harbourage points for biological contamination over the equipment's service life. For facilities requiring enhanced chemical resistance — such as those using chlorine-based disinfectants at higher concentrations — the Medigear.uk team can confirm the availability of material upgrades.

Built-In LED Operation Desk Lighting

The integrated LED lighting array provides shadow-free illumination of the work surface and specimen zone without requiring a separate task light or an adjustment to the overhead fitting. LED illumination delivers consistent colour rendering across the spectrum relevant to macroscopic pathology assessment — including the differentiation of tissue planes, margins, and lesion characteristics — at a colour temperature suited to clinical examination. The fixed mounting position above the work surface eliminates the positioning and adjustment steps associated with portable or adjustable lighting stands. LED lamp replacement schedules and luminance specifications are available in the technical documentation accessible through Medigear.uk.

Liftable and Detachable Multifunctional Material Rack: 0–400 mm

The rack system combines vertical adjustability across its full 0–400 mm range with complete detachability from the station frame, providing a degree of workspace configurability not achievable with fixed shelving. Multiple storage compartments within the rack accommodate specimen jars of varying sizes, cassette racks, reagent bottles, and ancillary equipment in an organised, accessible layout above the active dissection zone. The rack's stainless steel construction matches the main station body and is cleaned using the same disinfectant protocols used for all other surfaces. Medigear.uk can confirm rack compartment configuration and maximum load rating for institutions with specific storage requirements.

Three-Piece Detachable Stainless Steel Table Plates

The work surface is composed of three independently removable stainless steel plates, allowing each section to be detached for autoclave sterilisation, deep manual decontamination, or replacement without taking the entire station out of service. The perforated or slotted plate design allows fluid to drain from the work surface into the under-counter sinks below, minimising pooling during wet dissection and formalin application workflows. The detachability of individual plates supports a rotating decontamination schedule in high-throughput departments, where continuous station availability is operationally critical.

Dual Under-Counter Sink Configuration with Overflow Alarm

The large sink drains into a waste liquid collection bucket equipped with an overflow alarm, providing an audible warning before the container reaches capacity during formalin fixation or high-volume biological waste collection workflows. The small sink connects directly to the sewer system for clean water drainage from instrument rinsing and routine washdown tasks, physically segregating clean and contaminated water streams within the station's drainage infrastructure. This dual-drain approach aligns with COSHH biological waste management guidance and supports the documentation requirements of waste disposal compliance audits. Full drainage system specifications are available through Medigear.uk.

Hot and Cold Swing-Spout Mixing Faucet with Wrist Blade Handles

The swing-spout faucet provides both temperature-controlled water delivery and lateral positioning flexibility across the sink area. At the same time, the wrist-blade handle design allows flow and temperature adjustments without finger contact — a hands-free compliance feature for operators working with contaminated gloves. The swing mechanism allows the spout to be positioned precisely over either the large or small sink basin, supporting the segregated use of each sink for its intended drainage function without requiring the operator to reposition. The faucet body and handles are compatible with the disinfectant solutions used in standard stainless steel laboratory cleaning protocols.

Foot Pedal Water Control Function

The foot pedal provides a second, fully independent, hands-free water-activation mode that eliminates all hand or wrist contact with the water control system during active specimen handling. This dual hands-free capability — combining wrist-blade handles with foot-pedal operation — exceeds the single-mode provision of many comparable grossing stations and is particularly relevant in departments managing high-risk biological material or operating enhanced infection-prevention protocols. The foot pedal is positioned for natural access during the standard operator stance at the bench. It is constructed from materials compatible with the wet-floor environment of an active grossing station.

6.5-Foot Flexible Hand Spray

The hand spray is supplied with a 6.5-foot flexible hose providing reach across the full 1800 mm length of the work surface from a single connection point, allowing rapid post-session washdown without repositioning the operator or the hose assembly. The extended hose length is particularly valuable on a station of this size, where a shorter spray would require the operator to move between positions to cover the entire work surface. The spray head and hose materials are specified for resistance to the formalin concentrations and disinfectant solutions used in standard pathology laboratory cleaning procedures.

Left-Side Magnetic Instrument Tool Bar

The magnetic instrument toolbar is positioned on the left side of the station, providing a designated instrument storage location within the operator's natural reach during right-handed gross examination workflows. The magnetic surface retains stainless steel dissection instruments — forceps, scissors, knives, probes — securely without clips, holders, or secondary mounting hardware, and the entire bar is cleanable with standard laboratory disinfectants without risk of corrosion or demagnetisation under normal operating conditions. In departments that operate instrument count protocols, the toolbar's fixed location provides a consistent reference point for end-of-session accountability checks.

Multiple Hidden Duplex GFCI-Protected Electrical Outlets

The GFCI-protected duplex outlets are distributed throughout the station and recessed or otherwise hidden to prevent interference with surface-cleaning workflows, providing safe electrical access for cameras, dictation devices, digital pathology hardware, and additional tools in a wet laboratory environment. GFCI protection interrupts the circuit within milliseconds of detecting a ground fault — the recognised standard for electrical safety in wet areas under most laboratory building regulations. Multiple outlets eliminate the need for unprotected extension leads or power strips on the bench, reducing both electrical hazard and cable management complexity. Outlet positioning and load specifications are detailed in the technical documentation available through Medigear.uk.

Monitor Stand, Keyboard Stand, and Writing Board as Standard

The integrated monitor stand, keyboard holder, and writing board transform the RD-907S-N from a pure dissection bench into a complete inline documentation workstation, supporting LIS data entry, dictation management, and written case notes without the need for a separate desk or trolley in the laboratory bay. These components are included in the standard parts list rather than as optional extras, reducing the total fit-out cost for departments setting up or upgrading grossing areas. The documentation hardware positions the screen and keyboard at ergonomically appropriate heights relative to the standing operator, minimising the postural adjustment required to transition between specimen examination and data recording.

CE- and ISO-Certified — Full Documentation Available via Medigear.uk

CE certification confirms the RD-907S-N's compliance with applicable European safety directives for laboratory equipment, and ISO certification demonstrates conformance with internationally recognised quality and safety management standards — both of which are non-negotiable baseline requirements for equipment entering regulated hospital, university, and accredited private laboratory procurement frameworks. The complete certification documentation pack is available to institutional procurement teams through Medigear.uk without requiring direct contact with the manufacturer, reducing the administrative overhead of compliance verification. ODM and OEM customisation is accepted and does not affect the base certification status of the core station configuration.

Keyboard and Display Screen Holder

The dedicated keyboard and display screen holder is included as a standard component. I t provides a stable, adjustable mounting point for a monitor and keyboard at the grossing station, supporting inline specimen documentation, LIS connectivity, and digital image review without occupying the primary work surface. The holder is positioned to allow simultaneous visual access to the specimen and the screen, reducing the head-turn frequency and associated fatigue during long grossing sessions. For departments implementing direct digital pathology capture workflows, the holder provides a mounting reference point for camera and screen positioning that is compatible with most standard laboratory monitor and keyboard configurations.

The ROUNDFIN RD-907S-N Grossing Station delivers a comprehensive, documentation-ready grossing environment that addresses the workspace, safety, and digital integration requirements of professional histopathology practice across hospital pathology departments, academic research institutions, forensic laboratories, and private diagnostic services. CE- and ISO-certified throughout, it combines an 1800 mm stainless steel work surface, a 0–400 mm liftable tool rack, dual-drain waste management with overflow alarming, GFCI-protected electrical infrastructure, and integrated documentation hardware in a single configurable platform. Whether specified for a high-throughput NHS surgical pathology department, a research institution implementing digital pathology workflows, or a private laboratory requiring a standards-compliant grossing solution with ODM flexibility, the ROUNDFIN RD-907S-N Grossing Station provides the engineering breadth and certification foundation that serious laboratory procurement demands. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.