Roundfin RD-1150F

Hospital pathology departments and laboratory preparation rooms are the primary setting for the Roundfin RD-1150F Hanging Specimen Cabinet. The combination of a stainless steel work surface, a manual-tap sink, and tiered storage in a single unit consolidates equipment typically spread across two or three separate pieces of furniture, reducing the overall workstation footprint. NHS trust procurement officers sourcing through Medigear.uk will find CE and ISO certification readily available to simplify compliance documentation.

Mortuary and preparation facilities benefit from the RD-1150F's integrated sink and full 304 stainless steel construction. Mortuary environments require workstations that withstand repeated chemical disinfection, and 304-grade stainless steel meets this requirement on all contact surfaces. The manual tap lets you wash your hands between procedures without leaving the work area, which is a meaningful infection control advantage in environments where cross-contamination carries significant governance implications. Medigear.uk supports mortuary procurement with full compliance documentation and after-sales support.

Medical college teaching laboratories and anatomy preparation rooms benefit from the RD-1150F's tiered storage layout. The removable glass door on the upper cabinet allows at-a-glance identification of stored instruments and sample containers without opening the cabinet, reducing the risk of contamination between demonstrations. The base storage unit keeps the work surface clear for active use. Medigear.uk can discuss customisation options for institutions with specific configuration requirements.

Independent clinic operators and individual buyers seeking a self-contained workstation will find the RD-1150F well-suited for compact installations. The unit's integrated worktop, sink, upper store, and base cabinet deliver multi-piece furniture functionality in a single footprint. Medigear.uk provides full buyer support from specification through to delivery, and can confirm lead times and freight arrangements directly on enquiry.

Fully Integrated Workstation — Sink, Worktop, Upper Store, and Base Cabinet in One Unit

The RD-1150F eliminates the need to source and install a preparation surface, hand-washing sink, upper storage cabinet, and base storage unit as separate pieces of equipment. All four functional elements are combined in a single 600 × 600 mm floor footprint, reducing the total equipment spend and installation complexity for procurement teams. This consolidation is particularly valuable in environments where available floor space is a limiting factor in planning laboratory or mortuary workstation layouts.

Full 304 Stainless Steel on Every Surface

Every contact surface, panel, and structural element in the RD-1150F is fabricated from 304 stainless steel, with no coated or composite sections that could degrade under chemical exposure. This consistency means the same cleaning and disinfection protocol can be applied uniformly across the entire unit without risk of damaging a mixed-material surface. If an infection control audit requires evidence of material compliance, Medigear.uk has the full specification sheet on file and can provide it promptly.

Manual Tap Sink for At-Station Hand Hygiene

The integrated manual tap and sink allows operators to wash hands or rinse instruments at the point of use without leaving the work area. This reduces movement between contamination zones, a recognised infection-prevention measure in mortuary, pathology, and anatomy suite environments. Manual tap operation is preferred in clinical settings because it requires no sensor calibration or electrical maintenance, keeping the sink functional under the demanding conditions of a working laboratory or preparation room.

Removable Glass Door Upper Cabinet for Flexible Configuration

The glass door upper storage cabinet can be removed independently of the base unit and work surface, giving facility managers the option to reconfigure the workspace over time or replace the upper section without disturbing the countertop or base installation. The glass door allows visual stock checking without opening the cabinet, reducing handling events and the contamination risk they introduce. Medigear.uk can advise on available upper cabinet configurations and whether alternative options are accessible for this model.

CE and ISO Certification for NHS and Institutional Procurement

The RD-1150F holds both CE and ISO certification, satisfying the baseline conformity standards required by NHS procurement frameworks and institutional laboratory procurement processes. Certification documents are maintained by the Medigear.uk team and can be shared with procurement officers at the due diligence stage, reducing administrative delay in the purchasing timeline. This certification coverage extends to the full unit as supplied, not individual components.

Compact 600 × 600 mm Footprint with 950 mm Working Height

The square floor footprint of 600 × 600 mm makes the RD-1150F compatible with the bay dimensions of standard laboratory and mortuary environments without requiring structural adaptation of the installation space. The 950 mm working height is optimised for standing adult use and aligns with typical laboratory bench and preparation surface heights. This dimensional consistency reduces the need for height adjustment or supplementary furniture to achieve an ergonomically sound workstation configuration.

Customisation Available for Distributors and Bulk Buyers

The RD-1150F is now available for customisation, making it a practical platform for medical equipment distributors looking for OEM or white-label workstations. Institutional buyers with specific labelling, configuration, or finish requirements can engage the Medigear.uk procurement team to discuss available options. Medigear. The UK can negotiate bulk pricing and extended supply arrangements for distributors who need consistent multi-unit supply for hospital networks or medical college contracts.

Plywood Freight Packaging for Safe Multi-Zone Delivery

The RD-1150F ships in a 630 × 650 × 1030 mm plywood case, providing effective protection against impacts and moisture during transit — a relevant consideration for a stainless steel workstation that incorporates a sink assembly and a glass door component. Plywood packaging is standard for medical furniture of this complexity and weight class. Medigear.uk manages dispatch logistics and can confirm transit timelines and freight documentation for both domestic institutional deliveries and international distributor orders.

Applications Across Laboratory, Mortuary, and Teaching Environments

The RD-1150F is formally specified for laboratory, medical college, and hospital use, covering the three most common institutional procurement contexts for combined storage-and-preparation workstations. Its integrated design makes it equally effective in high-throughput hospital pathology departments, anatomy teaching suites that require a clear and well-organised preparation area, and smaller independent clinics or home-care installations where a single multifunctional unit is the most practical solution. Medigear.uk supports buyers across all of these contexts with specification guidance and procurement documentation.

Full 304 Stainless Steel Construction Throughout

The RD-1150F is fabricated entirely from 304 stainless steel across all panels, surfaces, cabinets, and structural frames. Grade 304 provides strong, consistent resistance to chemical cleaning agents, exposure to biological fluids, and the wet conditions inherent in sink-integrated workstations. Medigear.uk can provide the material specification sheet on request for procurement and audit compliance purposes.

Multifunctional Stainless Steel Work Surface

The countertop forms the primary preparation area of the RD-1150F, providing a flat, chemically resistant work surface suitable for specimen handling, instrument staging, and laboratory preparation tasks. The surface is fabricated from 304 stainless steel and shares the uniform cleanability of the rest of the unit. Its dimensions correspond to the overall 600 × 600 mm floor footprint, providing a practical working area within the compact installation envelope.

Integrated Sink with Manual Tap

A sink basin with a manual tap is built directly into the countertop of the RD-1150F, providing at-station hand hygiene and equipment rinsing without the need for a nearby separate plumbing installation. The manual tap is the standard configuration for laboratory and mortuary sinks, providing straightforward water control across repeated high-frequency use. Buyers should ensure that a compatible water supply and waste outlet are available at the intended installation point.

Removable Glass Door Upper Cabinet

The upper storage cabinet is designed to be removable, allowing the workspace to be reconfigured independently of the countertop and base unit. The cabinet door is glazed, enabling visual inspection of stored contents without opening it and reducing the frequency of access during active work sessions. The removable format also simplifies deep cleaning of the interior and allows the upper unit to be detached for repositioning or replacement.

Bulkhead on Upper Cabinet

A bulkhead is incorporated into the upper cabinet structure, providing additional rigidity to the cabinet body and supporting the integrity of the glazed door frame under repeated open-and-close cycles. The bulkhead is constructed from the same 304 stainless steel as the rest of the unit. This structural feature distinguishes the RD-1150F upper cabinet from lighter-duty storage units that may flex or warp over time under clinical use conditions.

Base Storage Cabinet

A storage cabinet is positioned beneath the countertop work surface, providing a dedicated zone for items that do not need immediate access during active work sessions — such as bulk consumables, spare instrument sets, or packaged reagents. The base cabinet uses the same stainless steel construction as the upper sections and can be cleaned with the same disinfection agents used for the rest of the unit. Medigear.uk can advise on load capacity and internal configuration options upon request.

Overall Unit Dimensions: L600 × W600 × H950 mm

The installed dimensions of L600 × W600 × H950 mm position the RD-1150F as a compact floor-standing workstation compatible with standard bay widths in laboratory and mortuary environments. The 950 mm working height is standard for adult standing use and consistent with typical bench heights in clinical preparation rooms. This dimensional profile avoids the need for structural modifications or supplementary furniture to achieve a functional installation.

CE Certification

The RD-1150F holds CE certification, confirming conformity with the applicable European product safety and quality standards for laboratory and medical workstation equipment. CE documentation is held on record by the Medigear.uk procurement team and available to buyers at the due diligence stage of institutional purchasing processes.

ISO Certification

ISO certification for the RD-1150F confirms compliance with internationally recognised quality management and product standards applicable to this category of medical and laboratory equipment. This certification is particularly relevant for NHS trust procurement frameworks and for institutional buyers in markets that require ISO compliance as a condition of supply. Medigear.uk can supply the relevant ISO documentation on request.

Customisation Available

The RD-1150F is customisable, with configuration, labelling, and finish options for institutional and distributor buyers. Medigear.uk manages customisation enquiries directly and can facilitate discussions with the Roundfin manufacturing team for orders that require specification changes beyond the standard factory build. Bulk order pricing is also negotiable through Medigear.uk for authorised distributors and NHS supply chain partners.

Plywood Packing Case: 630 × 650 × 1030 mm

The packing case for the RD-1150F is constructed from plywood rather than cardboard, providing superior protection for the stainless steel body, sink assembly, and glass door component during freight. The case dimensions of 630 × 650 × 1030 mm are compatible with standard pallet configurations for domestic and international shipment. Medigear.uk coordinates despatch and can confirm packing weights, freight timelines, and transit documentation on enquiry.

Fabricated from Drawing Board to Specification

Like all Roundfin products, the RD-1150F is manufactured to a confirmed drawing board specification, ensuring consistent dimensional accuracy and material quality across production runs. This consistency is important for institutional buyers placing multi-unit orders, where variation in fit or finish between units would create practical difficulties in standardised installation environments. Medigear.uk can confirm batch consistency and provide production documentation for large-volume procurement contracts.

The Roundfin RD-1150F Hanging Specimen Cabinet is a CE/ISO-certified, full 304 stainless steel workstation that combines a manual tap sink, a stainless steel countertop work surface, a removable glass-door upper storage cabinet with bulkhead, and a base storage unit — all within a single compact installation footprint. It is suited to hospital pathology departments, mortuary preparation facilities, medical college teaching laboratories, and independent clinics or home-care settings where an integrated specimen-handling and instrument-management workstation is required. We offer customisation for institutional and bulk buyers through Medigear.uk. We have full CE and ISO certification documentation on file and can provide it to procurement teams upon request. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.