Sale on Ophthalmic Equipment - Starting from 16 November!

Home
Shop
Sterilisation & Disinfection
Miele PG 8583 CD

✓ Professional Seller

Miele Sterilisation & Disinfection

Miele PG 8583 CD

Product Code: STDI-IC-963

Monitored washing and HEPA-filtered drying fit beneath one laboratory counter.

Unless the Pipettes programme is running, the Miele PG 8583 CD uses no more than 72 litres of water per cycle. Its undercounter body holds up to 128 vials or 98 pipettes, and glassware needs no manual pre-rinse.

Sections

Washer Disinfector

Categories

Sterilisation & Disinfection

Condition

Good

Origin

Germany

Seller Type

Professional Seller

CE & ISO Certified

Global Shipping

Supplier: Medigear

Miele's PG 8583 CD is an undercounter laboratory glassware washer designed around simplicity and sustainability. It takes over manual washing in laboratories, from pharmaceutical work to oil refineries, and glassware goes in without a pre-rinse at the sink. The laser-welded, crevice-free chamber is AISI 316L stainless steel and holds 145 litres. Modular basket setups suit injection loads or larger flat glassware of all types and sizes, and one load fits 128 injector nozzles, 128 vials, or 98 pipettes.

A variable-speed pump with an integrated heater element holds spray pressure through every programme phase. The spray arm, spray pressure, and conductivity monitoring follow each cycle, and liquid dispensing is automatic, with ProCare Lab chemicals specified for cleaning. Rear basket docking connects each basket to the water and air circuits, and SimpleLoad modules and a multi-stage filter system complete the wash side. DryPlus then dries the load with hot air through HEPA filtration, so glassware leaves the chamber dry.

Each of the 11 programmes has its own temperature, time, and water volume so that you can plan consumption cycle by cycle. Mini runs at 60 °C for 23 minutes on 28.5 litres, and Special 93C-10 reaches 93 °C over 67 minutes. Organic and Oil heat to 85 °C, Plastics stay at 55 °C, and Pipettes use 90 litres over 48 minutes. The washer carries the ACT sustainability label, and North American units are cCSAus certified.

The unit measures 900 × 700 × 835 mm (W × D × H). It is available to business buyers in more than 80 countries.

Pharmaceutical laboratories wash vials and pipettes in volume on the PG 8583 CD. A single load reaches 128 injector nozzles or 128 vials, and the Pipettes programme runs at 70 °C for 48 minutes on 90 litres. Injector Plus runs at 75 °C for 45 minutes on 72 litres and serves other injection loads. Special 93C-10 takes the chamber to 93 °C within a 67-minute cycle.

Oil refinery laboratories have their own Oil programme, at 85 °C for 36 minutes on 65.5 litres, and Miele offers a dedicated OIL version in the US. Organic also reaches 85 °C, while Inorganic runs at 75 °C for 33 minutes so that the cycle can follow the residue. Plastic labware has a Plastics programme of 40 minutes at 55 °C, using 54.5 litres of water.

For estates and facilities teams, the resource figures are known before installation. Each programme lists a water volume, from 28.5 litres for Mini to 90 litres for Pipettes, and each cold water inlet takes 7.5 L/min. At 835 mm high, the washer stands beneath a counter, and glassware goes in with no pre-rinse at a sink. DryPlus drying in the same chamber means no separate drying cabinet is needed for the batch.

Installation requires cold, hot, and DI water through 3/4-inch inlets, a drain rated at 16 L/min, and the electrical version suited to the site. DI water below 29 psi needs a booster pump. Miele specifies the PG 8583 CD as a laboratory glassware washer, so departments reprocessing surgical instruments need a medical washer-disinfector instead.

Stands beneath a counter

At 835 mm high and 900 mm wide, the washer sits under a laboratory worktop.

No pre-rinse at the sink

Glassware goes into the chamber without a pre-rinse.

Water use set per programme

Every programme has a stated volume, from 28.5 to 90 litres.

Injector capacity for 128 items

Up to 128 injector nozzles serve a single load.

Programmes matched to residue.

Organic, Inorganic, Oil and Plastics programmes suit different soils and materials.

Monitored cycles

Monitor spray arms, spray pressure, and conductivity throughout.

Drying in the same chamber

DryPlus hot air passes through HEPA filtration before it reaches the load.

Hygienic chamber

Laser welding leaves the AISI 316L stainless steel chamber free of crevices.

ACT sustainability label

The PG 8583 CD carries the ACT sustainability label.

145-litre chamber

The usable wash cabinet measures 530 × 520 × 520 mm.

Variable-speed pump

An integrated heater element works with it to maintain spray pressure throughout each programme phase.

Spray arm and pressure monitoring

Both are checked during each cycle.

Conductivity monitoring

Monitors conductivity as the programme runs.

DryPlus hot-air drying

Heated air dries glassware without moving it from the chamber.

HEPA filtration

Drying air passes through a HEPA filter before entering the chamber.

Automatic liquid dispensing

The system automatically doses cleaning agents, using ProCare Lab chemicals as specified.

Dispenser pumps

Two pumps feed detergent and neutralising agent.

Side drawer

It holds two 5-litre canisters.

Modular baskets

Set-ups take injection loads or larger flat glassware.

Rear basket docking

Each basket couples to the water and air circuits at the back of the chamber.

Multi-stage filter system

The filter system works in several stages.

11 programmes

Mini, Standard, Normal Plus, Intensive, Injector Plus, Inorganic, Organic, Oil, Plastics, Pipettes and Special 93C-10 are installed.

XKM module connection

A port on the machine accepts an XKM module.

Validation option

IQ/OQ validation is available.

The Miele PG 8583 CD suits pharmaceutical, oil refinery, and other laboratories that want glassware washed and dried in a machine under the counter, without pre-rinsing at the sink. Its case is the fit with the room and its utilities: an 835 mm-high body, a stated water volume per programme and an ACT sustainability label. Two limits matter most. Miele specifies it as a laboratory glassware washer, so instrument reprocessing calls for a medical washer-disinfector, and DI water below 29 psi needs a booster pump. North American units are cCSAus certified, while no CE marking or UKCA position has been evidenced. ProCare Lab chemicals are the specified cleaning agents.

FAQ

Frequently Asked Questions

Everything buyers need to know about sourcing medical equipment through MediGear.

The Miele PG 8583 CD is a high-capacity professional washer-disinfector for validated automated thermal and chemical disinfection of surgical instruments, clinical devices, and temperature-sensitive equipment. It is used in hospital central sterile services departments, operating theatre reprocessing units, day surgery facilities, and large dental practices. Its dual thermal and chemical capability accommodates the complete range of instrument types encountered in hospital and specialist clinical reprocessing.

Both are high-capacity Miele PG series washer-disinfectors with thermal and chemical disinfection capability. The PG 8583 CD provides a larger chamber capacity and extended programme range compared with the PG 8582 CD, making it suited to higher-volume CSSD and specialist environments managing a greater diversity of instrument loads. Medigear.uk can advise on the most appropriate unit for specific throughput and instrument complexity requirements.

The CD designation indicates integrated chemical disinfection programme capability alongside standard thermal disinfection cycles. Chemical programmes accommodate temperature-sensitive instruments and devices that cannot safely undergo the temperatures required for thermal A0 disinfection. This extends the unit's compatibility to the full range of instrument materials and types found in hospital and specialist clinical inventories.

Yes. The PG 8583 CD is validated to EN ISO 15883, achieving defined A0 values during thermal disinfection that confirm effective microbial inactivation. CE marking confirms compliance with applicable medical device directives. Full validation and certification documentation is available from Medigear.uk at the time of supply.

Yes. The PG 8583 CD logs and prints comprehensive cycle data for every run, including temperature profiles, time parameters, disinfection method selection, detergent dosing, and cycle completion status. This documentation supports the traceability and audit trail requirements of hospital infection prevention systems and CSSD regulatory inspection.

Yes. The chemical disinfection programme capability of the PG 8583 CD is specifically designed for temperature-sensitive instruments and devices that cannot safely undergo thermal disinfection. This allows hospitals and specialist facilities to process their complete instrument inventory — both standard and thermolabile — through a single validated high-capacity reprocessing unit.

Medigear.uk provides full installation guidance, technical documentation, and coordination of on-site installation support for the PG 8583 CD. Annual maintenance contracts are available for scheduled preventive servicing, cycle revalidation support, and ongoing technical assistance in hospital and CSSD environments.

The PG 8583 CD is available through Medigear.uk for hospital procurement, government tender supply, and specialist facility purchasing. Full product documentation, CE certification records, EN ISO 15883 validation data, and pricing are available on request. Contact Medigear.uk to discuss specifications, programme configurations, and supply terms.