The PG 8583 serves laboratories that wash reusable glassware throughout the working day. A technician fills the upper and lower baskets with flasks and pipettes, selects a programme at the front panel and starts the cycle, or sets the start up to 24 hours ahead. The cabinet is 530 mm wide and 520 mm high, so it holds a full load of 128 laboratory flasks or 98 pipettes at once. The washer then runs through its stages until a buzzer marks the end of the programme.
Programmes are named for the work they do. Inorganic and Organic match the type of residue; a Pipettes programme serves pipettes, Plastics serves plasticware, and Injector Plus serves loads set on injector nozzles. Standard, Universal, Intensive, Mini and Special 93°C-10' complete the list, and 2 free positions hold programmes that the laboratory writes at the panel.
At the end of a programme, EcoDry opens the door once the cabinet cools below 70°C, so residual moisture escapes and items dry faster. The technician unloads the cabinet and loads the next set. Spray pressure monitoring detects falling jet pressure or blocked loads during the run. If power is cut briefly during a run, programme failure protection resumes the cycle and warns when the result may be affected.
Where cycles are recorded, an optional communication module connects the washer to process documentation through Ethernet or RS 232, and Wi-Fi is available through DataDiary. The slimline 600 × 600 mm body fits under a worktop or stands free, with hot, cold, and demineralised water and a DN 22 drain within reach.