Miele E 126

The E 126 serves hospital reprocessing departments that clean infusion flasks in Miele medical washer-disinfectors, including the PG 8562, PG 8582, and PG 8592, as well as the PWD 8682 and PWD 8692. Laboratories running the PG 8535 or PG 8536 can use the same insert. Decontamination technicians and laboratory staff load it with up to 48 infusion flasks at a time.

Loading follows the grid. Each flask goes into a 45 × 45 mm compartment for the bottle, and its neck has its own 28 × 28 mm compartment, so every flask takes the same place across the insert. Miele designs the E 126 for optimal loading of infusion flasks, and a full insert brings a batch of 48 into the machine at once. The batch comes out in the same order it went in.

Sites with more than one Miele machine gain a single insert design across them. Seven medical models, the PG 8562, PG 8582, PG 8582 CD, PG 8592, PWD 8682, PWD 8682 CD, and PWD 8692, take the E 126, along with the PG 8535 and PG 8536 laboratory machines. For example, a department that runs a PG 8582 next to a PWD 86e loads flasks the same way on both.

The insert is stainless steel, stands 83 mm high, and weighs 1.92 kg, keeping it flat and light enough to carry between the loading area and the machine. As a passive insert, it adds nothing to the electrical testing schedule. Its material number, 03808520, identifies it on reorder.

Forty-eight flasks per insert

The insert has 48 compartments. A full batch of infusion flasks goes in together.

Body and neck compartments

Each flask has a 45 × 45 mm bottle compartment and a 28 × 28 mm neck compartment. Every flask takes a defined place.

Made for infusion flasks

Miele designs the E 126 for the optimum loading of infusion flasks. The compartment sizes follow that load.

Nine compatible machines

Medical PG and PWD models and two laboratory PG models all take the insert. One design serves a mixed site.

Flat 83 mm profile

The insert stands 83 mm high. It lies flat across its 445 × 445 mm footprint.

Stainless steel construction

Material and finish are stainless steel. The insert weighs 1.92 kg.

Ordered loading and unloading

The grid fixes every flask position. A batch comes out in the order it went in.

Passive design

The insert has no electrical components. Upkeep involves no charging or electrical tests.

48 compartments

Forty-eight compartments make up the insert. Each takes one infusion flask.

45 × 45 mm bottle compartments

The bottle compartments measure 45 × 45 mm. They take the body of each flask.

28 × 28 mm neck compartments

Neck compartments measure 28 × 28 mm. Each matches a bottle compartment.

Infusion flask loading

Miele designs the insert for the optimum loading of infusion flasks. The compartment grid follows that purpose.

Stainless steel

The E 126 is stainless steel. Material and colour are both stainless steel.

445 × 445 mm footprint

Width and depth are both 445 mm. The insert is square in plan.

83 mm height

Net height is 83 mm. The insert sits low in the machine.

1.92 kg net weight

Empty, the insert weighs 1.92 kg. Packed, it weighs 2.05 kg.

Packed size

Packed, it measures 475 × 475 × 160 mm. Its packing volume is about 0.036 m³.

Medical PG models

The PG 8562, PG 8582, PG 8582 CD and PG 8592 take the E 126. All four are Miele medical washer-disinfectors.

PWD models

The PWD 8682, PWD 8682 CD and PWD 8692 also take the insert. Miele assigns it to all three.

Laboratory PG models

The PG 8535 and PG 8536 also take the insert. Both are laboratory washer-disinfectors.

Insert for various flasks.

Miele classifies the E 126 as an insert for various flasks. It sits in the medical washer-disinfector range.

Material number and EAN

Material number 03808520 identifies the insert, with 69512601D as the earlier number. The EAN is 4002511115835.

The E 126 suits hospital reprocessing departments and laboratories that clean infusion flasks in Miele washer-disinfectors and want each flask held in a fixed place. Its deciding strength is the paired compartment grid: 48 places, each with a 45 × 45 mm compartment for the bottle and a 28 × 28 mm compartment for the neck. Miele designed that grid for optimal loading of infusion flasks. It also suits sites with several Miele machines, since seven medical models and the PG 8535 and PG 8536 laboratory machines all take it. The stainless steel insert weighs 1.92 kg and measures 445 × 445 × 83 mm.