AQUAMAXX P300

Physiotherapy and rehabilitation settings are where the P300 is positioned by its manufacturer, which describes the machine as using water buoyancy for weight reduction, walking training, and water resistance for aerobic work. Adjusting depth between 0.3 and 1.3 m changes the proportion of body weight passing through the limb, allowing loaded walking to begin earlier than it could on land. The single-user chamber is suited to one-to-one supervised sessions in a treatment room rather than shared facility use. Medigear.uk supplies the P300 on the basis that programme design and clinical decision-making remain with the qualified practitioner directing the session.

Musculoskeletal and orthopaedic rehabilitation uses the 0.2 to 8.0 km/h belt range to carry a user through stages of recovery on a single machine. Early work sits at the bottom of the range under close supervision, progressing toward jogging speeds as tolerance builds. Adjustable water velocity and flow provide an additional progression axis that does not require an increase in pace, and the resistance jet adds loading where appropriate. Medigear.uk provides the manufacturer's parameter documentation to support each facility's own equipment assessment.

Conditioning and reduced-impact training environments apply the same machine for volume work with lower joint loading than land running. The built-in rest chair allows interval work with recovery taken inside the chamber rather than requiring exit and re-entry, which suits structured session design. Live display of time, distance, speed and calories means each session is recorded rather than estimated. Medigear.uk supplies training facilities on account terms.

Gait re-education settings benefit from an enclosed environment where a stumble carries less consequence than on land. The buffered flywheel shutdown supports closely supervised stepping work, and the compact footprint under 2.5 m² makes the machine viable in clinic rooms where floor space is limited. Medigear.uk advises on configuration for this application.

Buoyancy Reduces Loading Without Reducing Activity

Water depth, adjustable between 0.3 and 1.3 m, controls how much body weight passes through the lower limbs during walking. This allows loaded, functional movement at a stage when full weight bearing on land would not be tolerated. The variable is adjustable rather than fixed so that it can be progressed deliberately. It is the mechanism the machine is built around.

Compact Chamber Under 2.5 Square Metres

The base machine occupies less than 2.5 m² of floor space, placing it within reach of clinic treatment rooms and studio spaces. Floor area is usually the constraint that prevents aquatic equipment being adopted at all. A footprint this size turns the question from whether there is room into where it should go. Medigear.uk assesses room suitability before order.

Water Movement Adjustable Alongside Belt Speed

Velocity and flow are both controlled independently of the belt through the display screen. This gives a practitioner a way to increase difficulty without asking a user to walk faster, which is often the appropriate progression. When combined with depth adjustment, the three variables can be changed one at a time. Precision of that kind is difficult to achieve in an open pool.

Rest Chair Built Into the Chamber

A rest chair is fitted as standard, allowing recovery between efforts without the user leaving the machine. Exiting and re-entering a water chamber is time-consuming and, for some users, the least stable part of a session. Keeping recovery inside the chamber makes interval work practical. It also keeps the user under continuous observation.

Direct 220 to 240V Supply

The P300 is specified at 220 to 240V, a straightforward single-phase range that avoids the three-phase question entirely. Electrical installation is correspondingly simpler to plan and cost. Assessment by a qualified electrician remains necessary given the wet environment. Medigear.uk provides the electrical specification ahead of delivery.

Modular Water Management Rather Than Fixed

The water tank and conversion station are optional rather than built in, so a buyer already served by existing water services is not paying for duplicate plant. Where needed, the optional tank includes a 2 kW heater, a 1 HP circulation pump, ozone disinfection, and filtration with recyclable water. Medigear.uk prices both alongside the base machine. The total installation cost is therefore clear in the quotation rather than emerging later.

Session Data Captured on an IP65 Touch Panel

The waterproof LED control panel displays elapsed time, calories, distance and speed during use. Conditions can be recorded rather than estimated, which matters wherever progress must be evidenced. The IP65 rating suits permanent siting beside water. Medigear. UK supplies documentation with the order.

Verified Provenance With Volume and Single-Unit Supply

The P300 comes from a manufacturer that has been operating since 2000 in rehabilitation and sports equipment production. Where certifications or parameters are not published for this model, Medigear.uk obtains them in writing rather than estimating. Distributors receive factory dialogue on configuration and minimum quantities, while single-unit buyers receive the same specification rigour and written lead times.

Machine Dimensions: 2330 × 966 × 2013 mm

The chamber measures 2330 × 966 × 2013 mm and occupies under 2.5 m² of floor area. Its 2013 mm height requires ceiling clearance to be checked alongside floor space. These figures govern room suitability more than any other specification.

Treadmill Speed: 0.2 to 8.0 km/h

Belt speed is adjustable from 0.2 to 8.0 km/h, spanning minimal supervised stepping through to jogging pace. This breadth allows one machine to serve a user across stages of capability. Speed is set through the control panel during the session.

Running Belt: 510 × 1450 mm

The running surface measures 510 × 1450 mm. Belt dimensions govern stride accommodation and therefore which users can walk naturally on the machine. This should be checked against the intended user population.

Operating Water Depth: 0.3 to 1.3 m

Chamber water depth adjusts between 0.3 and 1.3 m, the primary control over how much body weight buoyancy removes. Depth is set according to the individual rather than fixed at installation. It is adjusted independently of belt speed.

Water Temperature Range: 20 to 35 Degrees Celsius

The chamber operates between 20 and 35 degrees Celsius. Temperature affects both comfort and physiological response during extended sessions. Heating is provided through the optional water tank where specified.

Maximum Water Volume: 2.0 m³

The chamber holds up to 2.0 m³ of water. Filled, this adds around two tonnes above the dry machine weight, making structural floor assessment necessary. Volume also determines fill time and treatment demand.

Net Weight: 450 kg

The machine weighs 450 kg dry. Delivery access and final positioning must be accounted for before the consignment arrives. Medigear.uk factors machine weight into freight and installation planning.

Single-User Capacity with Rest Chair

The chamber is fitted for one user and includes a rest chair. Recovery between efforts is taken inside the machine rather than requiring exit and re-entry. This suits interval work and keeps the user under continuous observation.

Powerful Massage Water Gun

A massage water gun is included in the standard specification. It provides directed water pressure for targeted use within the chamber. Inclusion is standard rather than optional.

Resistance Jet

One resistance jet is fitted within the chamber. This adds water loading beyond that produced by movement alone, allowing intensity to be raised without altering belt speed. It forms part of the base specification.

Class F Flywheel Motor with Buffered Shutdown

Drive is by a Class F flywheel motor specified to deliver a buffered rather than abrupt shutdown. This matters when a user is mid-stride and partially supported by water. Motor class indicates the thermal rating of the winding insulation.

IP65 Waterproof LED Touch Control Panel

The control panel is IP65-rated with an LED touchscreen displaying elapsed time, calories, distance, and speed. IP65 denotes protection against dust ingress and low-pressure water jets from any direction. This rating is appropriate for permanent siting in a wet environment.

Adjustable Water Velocity and Flow

Both water velocity and flow are adjustable through the display screen, independently of belt speed. This provides an additional progression variable that does not require faster walking. Adjustment is made during the session without interruption.

LED Lighting and Twin Loudspeakers

One LED lighting unit and two loudspeakers are fitted as standard within the chamber. Lighting supports visibility of limb position during supervised work. Both are included in the base specification.

Optional Water Tank: 1775 × 787 × 1530 mm

An optional water tank measuring 1775 × 787 × 1530 mm occupies under 1.5 m² and weighs 150 kg empty, holding 1.3 m³. It carries an imported GECKO control system with an IP65 touch panel, a 2 kW heater, a 1 HP circulation pump and ozone disinfection with filtration, allowing water to be recycled.

Optional Water Conversion Station: 980 × 787 × 1500 mm

An optional water conversion station measuring 980 × 787 × 1500 mm occupies less than 0.8 m² of floor space. It houses a filter-sand cylinder, two self-priming pumps with hair collectors, and a solenoid valve. This is specified where full water treatment is required alongside the tank.

Power Supply: 220 to 240V

The P300 is specified at 220 to 240V. A qualified electrician should assess the electrical installation, given the combination of motor and, where fitted, heating and pumping loads, in a wet environment. Medigear.uk provides the electrical specification ahead of delivery.

The P300 Portable Underwater Treadmill delivers buoyancy-assisted walking and running training in a chamber occupying under 2.5 m², making aquatic gait work viable in clinic rooms and studios that could not house a larger installation. Belt speed from 0.2 to 8.0 km/h, water depth from 0.3 to 1.3 m, and independently adjustable water velocity provide three progression variables, suiting physiotherapy practices, musculoskeletal and orthopaedic rehabilitation, reduced-impact conditioning, and supervised gait re-education alike. Water management is modular, with heating, ozone disinfection,n and filtration available as optional plan components. Certification records are verified against this specific model before supply, and clinical decision-making remains with the practitioner who directs each session. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.