AQUAMAXX ICE-015

Sports and performance facilities are the most common setting for equipment of this configuration, where chilled and warm water are provided side by side as part of a wider facility offer. Having both permanently available removes the scheduling problem posed by a single-vessel arrangement, since a tub cannot be cooled and heated in a single session. Medigear.uk supplies the ICE-015 as equipment and makes no claim about physiological outcomes from cold water immersion; where a facility offers it as part of a programme, the protocols, screening and supervision arrangements remain that organisation's responsibility, informed by appropriately qualified advice.

Recovery studios and commercial gyms use two-temperature installations for the same practical reason. Throughput is the operational question rather than capability, and it is governed by how quickly the cold tub returns to temperature between users. That recovery rate depends on chiller capacity and insulation rather than on the quoted minimum temperature, which is why Medigearuk obtains both figures in writing before quotation rather than after installation.

Facilities in regulated or supervised settings should note that manufacturer-stated operating limits are documentation to be obtained, not detail to be assumed. The minimum safe temperature, maximum immersion duration, contraindications, a nd any supervision requirements are requested from the factory and supplied in full. Where a manufacturer will not commit those limits to writing, that absence is itself relevant to a procurement decision.

Private and residential installations account for a growing share of demand. Medigear.uk supports individual buyers through site assessment, electrical and loading requirements and installation documentation, and recommends that anyone considering cold water immersion take advice from a qualified medical practitioner beforehand, particularly where a cardiovascular or respiratory condition exists.

Two Water Temperatures Permanently Available

A single vessel cannot be chilled and heated in a single session, making temperature alternation impractical on one-tub equipment. Two separate bodies of water in one shell remove that constraint entirely. For a facility,y this is the difference between offering both temperatures and offering one at a time. Medigear.uk confirms both tub capacities before order.

One Installation Rather Than Two Purchases

Combining both functions in a single cabinet avoids the need to buy and service two separate units. Floor area, plumbing and commissioning are all handled once. Whether the plant is shared or duplicated across the two tubs significantly affects running costs. Medigear.uk obtains that detail in writing at the time of quotation.

Electrical Load Established Before Site Work

A refrigeration and heating plant in one cabinet can draw well beyond a standard domestic supply, and on chilled units, the compressor is often the largest single load. Discovering a three-phase requirement after groundwork has begun is an expensive way to learn it. Medigear.uk obtains the confirmed total load and supply requirements before issuing the quotation. This ordering of questions is deliberate.

Recovery Rate Treated as the Real Specification: The minimum temperature is the figure most readily quoted, but the recovery time between users determines throughput in a commercial setting. A tub that reaches a low temperature slowly serves fewer people than one that returns to temperature quickly. Medigear.uk asks for both, along with the conditions under which each was measured.

Provenance Confirmed Before Quotation

This model does not appear in the AQUAMAXX catalogue or installation records, and its designation breaks from that range's naming convention. Company credentials applying elsewhere in the range cannot be assumed to carry across. Medigear.uk verifies which manufacturer supplies the unit and which certifications it holds before proceeding. Buyers therefore know exactly whose product and whose warranty they are buying.

Equipment Described, Outcomes Not Promised

Cold water immersion is marketed with a wide range of therapeutic claims across this product category. Medigear.uk describes what the equipment is and does, supplies the manufacturer's own documentation in full, and makes no claim about physiological results. For professional and institutional buyers who must justify a purchase internally, verifiable specification is worth considerably more than unsupported benefit language.

Safety Documentation Obtained, Not Paraphrased

The minimum safe temperature, maximum immersion duration, contraindications, and supervision requirements are requested from the manufacturer in written documentation and passed to the buyer intact. A retailer summarising clinical cautions is not a reliable source for them. Where a manufacturer will not commit those limits to writing, Medigear.uk reports that plainly.

Procurement Support Rather Than Guesswork

Sourcing an unlisted model requires direct factory dialogue regarding provenance, specifications, certification, safety documentation, and lead time. Medigear.uk handles that on the buyer's behalf and returns written answers rather than approximations. Distributors follow the same process for volume enquiries, with minimum quantities established on a case-by-case basis.

Two-Tub Configuration in One Shell

Product imagery shows a compact tub alongside a larger jetted tub sharing a single cabinet. This is the model's defining arrangement. Whether the two tubs are hydraulically independent is confirmed with the factory.

Overall Dimensions and Footprint

External dimensions determine whether the unit fits the intended space and whether it can reach that position along the delivery route. No dimensional figures are published for this model. Medigear.uk obtains them in writing before quotation.

Cold Tub Capacity

Cold tub volume governs both the cool-down time and the number of people the tub serves before the temperature rises. It is a more useful figure than overall capacity for planning commercial use. This parameter is confirmed with the factory.

Warm Tub Capacity and Seating

Warm tub volume and seating provision determine group use and heating demand. These are separate figures from the cold side and should be quoted separately. Both are obtained in writing before order.

Chiller Capacity

Chiller capacity is the single most consequential specification for a chilled unit, governing both minimum temperature and recovery rate. It is not published for this model. Medigear.uk requests the rating and the conditions under which it was measured.

Minimum Water Temperature

The achievable minimum temperature depends on chiller capacity, insulation, and ambient conditions. A figure quoted without those qualifications is of limited planning value. Medigear.uk obtains the manufacturer's stated minimum with its measurement conditions.

Cool-Down and Recovery Time

Time to reach temperature from ambient, and recovery time between users, determine throughput in any commercial setting. Neither is published. Both are requested in writing at quotation stage.

Heater Rating on the Warm Side

Heater capacity governs heat-up time and temperature stability on the warm tub, and forms part of the total electrical load. Whether heating and chilling share a control system is a related question; both are confirmed before order.

Massage Jet Provision

Product imagery indicates jets fitted to the larger tub. Jet count, pump sizing and whether massage runs on a circuit independent of circulation all affect performance in daily use. Exact provision is confirmed on request.

Pump Configuration

Pump ratings and whether the two tubs share a circulation or run separately affect both running costs and maintenance routines. Shared plant means conditions in one tub can be influenced by the other. Medigear.uk obtains the configuration in writing.

Water Treatment and Filtration

Water held at low temperatures requires different treatment than heated water. Whether each tub has its own filtration andsanitation systeme, or sharesa systemm, is not published. The specification for each is confirmed before quotation.

Insulation Specification

Insulation matters in both directions on a two-temperature unit, since a chilled vessel gains heat as readily as a heated one loses it. Cabinet insulation, therefore, affects running costs on both sides. Specification is obtained from the factory in writing.

Total Electrical Load and Supply

Combined refrigeration, heating, and pumping loads may exceed the capacity of a standard domestic supply and require three-phase provision. This is the parameter most likely to affect the cost of site preparation. Medigear.uk establishes the confirmed figure before quotation.

Filled Weight and Floor Loading

The combined weight across both tubs determines the structural assessment for any deck, terrace, or suspended floor. The combined volume, rather than either tub alone, is the relevant figure. Medigear.uk confirms it in writing before order.

Safety Documentation and Operating Limits

Manufacturer-stated minimum safe temperature, maximum immersion duration, contraindications and any supervision requirement are requested as written documentation. Medigear.uk supplies these intact rather than summarised and plainly reports where a manufacturer declines to provide them.

Model Provenance and Certification

The ICE-015 does not appear in the AQUAMAXX catalogue or installation records, so the manufacturer and applicable certification are established before anything else. Company credentials from elsewhere in that range cannot be assumed to apply. Medigear.uk confirms both in writing.

Documentation Pack Supplied at Order

Every unit supplied is accompanied by the manufacturer's technical documentation, installation guidance, maintenance schedule, safety documentation,a nd applicable certification records. Medigear.uk assembles this at order rather than leaving buyers to source it. Where a parameter was previously unpublished, its confirmed value is included in writing.

The ICE-015 Cold Plunge Spa places a cold immersion tub alongside a jetted warm tub in a single shell, making both temperatures permanently available from a single installation rather than one at a time, which suits sports and performance facilities, recovery studios, commercial gyms, and private installations alike. Because no parameter table is published and the model does not appear in the AQUAMAXX catalogue or installation records, this page serves as an enquiry route rather than a datasheet: manufacturer provenance and certification, dimensions, tub capacities, chiller capacity and recovery rate, water treatment, filled weight and total electrical load are all obtained from the factory in writing. Medigear.uk supplies this unit as equipment, passes on the manufacturer's safety documentation and operating limits intact, and makes no claim about physiological outcomes from cold water immersion. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.