LUVXOM SH3-B-4-1

This probe holder laptop trolley's height range suits working beside a couch. When an operator sits at a patient's side rather than standing at a bed, a 650 mm deck brings the equipment to lap level and keeps the screen within a natural line of sight while a hand is occupied. Ward trolleys pitched at 770 mm or higher force the operator to reach up mid-procedure. The 900 mm ceiling still allows the cart to be wheeled and set down at a standing position between patients.

The probe cups shape the workflow. Two holders mean two transducers can hang ready rather than resting on the deck or the bed, which protects the heads and keeps leads off the floor. The practical questions are what the cups will actually take, since transducer bodies vary considerably in size, and how they are cleaned, because a holder in regular contact with coupling gel needs a defined regime rather than a general wipe. Neither is answered on the sheet.

The printer tray completes the arrangement. At 440 by 268 mm, it accepts a report printer like the one used to produce an image record at the point of care, and the small 150 by 150 mm expansion tray suits gel or a small accessory box beside it. The 15 kg payload limit covers the machine, the printer, both probes,s and anything else placed on the trolley.

Medigear.uk confirms the payload basis, the probe cup dimensions and the cleaning regime before this probe holder laptop trolley enters clinical use.

Reaches Genuinely Low

A 650 mm deck sits a clear 100 mm below anything else in this range, allowing a seated operator to work at lap level rather than reach upward.

Two Transducers Held Ready

Fitted cups keep probes upright and off the bed between uses, protecting the heads and keeping leads clear of the floor.

Report Printer Accommodated

A dimensioned 440 by 268 mm tray means you can check a printer against the trolley in advance, rather than treating it as an unsized afterthought.

Small Accessory Tray

The 150 by 150 mm expansion surface is about right for a gel bottle or a small box, without adding width to the trolley.

Honest Payload Figure

Quoting 15 kg rather than repeating the range-wide 50 kg suggests a rating specific to this chassis, which is more useful than a uniform number.

Compact Four-Castor Base

At 476 by 478 mm, the base sits within the deck footprint, so nothing projects to catch on a couch or an examination table.

Full Pneumatic Adjustment

Two hundred and fifty millimetres of gas travel lets the operator set the deck, then raise it for transit between patients.

No Display Hardware to Pay For

With the laptop supplying the screen, no bracket, arm or mounting plate is fitted or charged for.

Deck Height of 650 to 900 mm

Pneumatic travel of 250 mm, the lowest range LUVXOM publishes here.

Countertop of 490 by 490 mm

A square working surface, quoted to within 5 mm.

Aluminium Deck, 8 mm Thick

The construction stated for this reference.

Base of 476 by 478 mm

The chassis footprint, marginally smaller than the deck above.

Three-inch Silent Castors

The smaller wheel size shared with the lighter references here.

Two Probe Cups

Holders fitted for transducers, with the count published and no dimensions given.

Printer Tray of 440 by 268 mm

A dimensioned lower shelf sized for a report printer.

Expansion Tray of 150 by 150 mm

A small additional surface beside the main deck.

Trolley Weight of 23 kg

Published to within a kilogram.

Payload Rating of 15 kg

Specific to this reference, against 50 kg quoted elsewhere in the range.

Read the specification, not the title, and this stops being a general laptop cart. A deck starting at 650 mm, two fitted probe cups,s and a printer tray sized for a report describe a seated procedure on a couch, not documentation on a round. LUVXOM never names the application, so this page states none, but the arrangement is otherwise hard to read. Two figures need resolving before it is listed. The 15 kg payload is a third of what every sibling reference claims, on a chassis heavier than most of them, and until the measurement basis is clear, a buyer cannot tell whether that is honesty or a genuine limit. The probe cups also have no published dimensions and no cleaning regime, which matters for a holder meeting gel repeatedly. Medigear.uk secures all of those details from LUVXOM before quoting this probe holder laptop trolley.