Grace Medy BCMM-ZR05-1

General nursing wards benefit from the Grace Medy BCMM-ZR05-1 manual nursing bed's comprehensive standard accessory set — stand-up puller, wash basin, bed pan, dining table, and IV stand — delivered without separate procurement orders. The motorised height column supports staff ergonomics during procedures, and the back lift from 0° to 75° covers respiratory management, assisted feeding, and post-operative recovery. Medigear.uk supports NHS nursing ward procurement teams throughout the specification and approval process.

Rehabilitation settings benefit from the BCMM-ZR05-1's stand-up puller, which helps patients practise self-repositioning during early rehabilitation. The back ranges from 0° to 75°, supporting progressive sitting tolerance, and the leg lift to 45° supports lower-limb positioning exercises. The motorised height column can be lowered during transfer practice and raised during physiotherapy assessments. Medigear.uk can provide specification packs for rehabilitation procurement teams.

Long-term care and high-dependency settings benefit from the BCMM-ZR05-1's integrated wash basin, bedpan, dining table, and drainage bag hooks, which reduce the frequency of patient transfers required for personal hygiene, continence management, and mealtimes. For patients with limited or no transfer tolerance, this integrated accessory provision directly reduces both the manual handling burden on nursing staff and the patient discomfort associated with repeated transfers. The IV stand supplied as standard supports concurrent IV therapy management at the bedside. Medigear.uk can provide documentation for long-term care unit procurement assessments.

Home care settings benefit from the BCMM-ZR05-1's self-contained accessory set — wash basin, bedpan, dining table, stand-up puller, and IV stand — delivered as a single unit, eliminating the need for families to source items separately. The motorised height column supports carer back protection, and the low minimum height supports falls-risk management during the post-discharge period. Medigear.uk offers individual buyer consultation and delivery coordination for families arranging home nursing provision.

Most Comprehensively Accessorised Bed in the Grace Medy Range

The BCMM-ZR05-1 is supplied with more standard accessories than any other bed in the Grace Medy range reviewed on Medigear.uk, including a stand-up puller, wash basin, bed pan, dining table, IV stand, two drainage bag hooks, gear guardrail, and 8cm mattress — all included without additional procurement. For NHS procurement officers building nursing ward specifications, the single-purchase, full-accessory provision reduces the purchase order complexity of procuring bed accessories separately. For home care buyers, the complete accessory set removes the need to source individual items before the patient arrives home. Confirm the full accessory list and specifications with Medigear.uk.

Stand-Up Puller for Patient Independence and Reduced Carer Dependency

The stand-up puller supplied as standard with the BCMM-ZR05-1 provides a grip point to assist patients in moving from lying to seated without full carer assistance, reducing dependence on nursing staff for this high-frequency repositioning event. For NHS nursing wards managing patients who retain partial upper-body strength but require assistance for sitting transfers, the stand-up puller supports progressive rehabilitation and independence. It reduces the staffing demand per repositioning event. For home care carers managing patients on their own, the stand-up puller can enable supported independent repositioning that would otherwise require two people. Confirm the stand-up puller specification and weight rating with the Medigear.uk procurement team.

Wash Basin and Bed Pan for Transfer-Free Personal Care

The wash basin and bed pan are supplied as standard with the BCMM-ZR05-1 support, bedside hygiene and continence management without requiring the patient to transfer to a separate facility, reducing the total number of manual handling events per shift for nursing staff and reducing patient discomfort and dignity risk associated with transfer-based personal care in high-dependency settings. For patients who are transfer-contraindicated due to surgical restrictions, neurological conditions, or fall-risk assessments, the integrated wash basin and bedpan represent a meaningful clinical governance benefit. Confirm accessory specifications with Medigear.uk.

Dining Table for Mealtime Support Without Transfer

The dining table supplied as standard with the BCMM-ZR05-1 supports assisted and independent eating directly from the bed during the elevated back section position, eliminating the need for patients with limited mobility to transfer to a chair or dining room for mealtimes. In nursing and long-term care settings, where mealtimes account for a significant proportion of daily transfer events, integrating the dining table into the standard bed specification reduces the total daily manual handling burden on nursing staff and improves mealtime independence for ambulatory patients. Confirm dining table dimensions and attachment mechanism with the Medigear.uk procurement team.

CE Certification for NHS Nursing Ward and Care Home Procurement

The BCMM-ZR05-1 carries CE marking under Medical Device Directive 93/42/EEC, satisfying the baseline requirement for NHS nursing ward procurement frameworks, CQC-regulated care settings, and OJEU tendering. Medigear.uk holds the complete declaration of conformity and technical file, available to procurement officers and clinical governance reviewers on request. For distributors building nursing-bed product tiers for NHS trusts and care-home supply chains, CE certification supports straightforward product-listing compliance.

Motorised Height Column for Clinical Staff Ergonomics and Falls-Risk Management

The BCMM-ZR05-1's motorised height column adjusts from a low minimum position to 695 mm, supporting two distinct clinical applications simultaneously: raising the bed to a comfortable working height for nursing procedures to protect staff from musculoskeletal loading, and lowering the bed to a minimum height for patients at the highest assessed risk of falls. The ultra-low minimum height — to be confirmed with the Medigear.uk procurement team — may allow the platform to be positioned near floor level, significantly reducing the risk of injury from falls compared with fixed-height or standard-range height-adjustable beds. Medigear.uk can provide full height range documentation for clinical risk assessment submissions.

Full IV Support: Stand Included, Dual Drainage Hooks, Optional Hole Configurations

The BCMM-ZR05-1 includes an IV stand as a standard accessory and two drainage bag hooks, with IV stand holes available in 4- or 2-diagonal configurations as an optional upgrade. This complete IV support provision means patients receiving IV therapy and drainage management can be fully serviced at the bedside without supplementary equipment. For NHS wards and home care settings where IV therapy continuation during mobilisation and positioning changes is a routine clinical requirement, the integrated IV provision simplifies daily care management. Confirm IV stand height, hook load rating, and hole configuration options with Medigear.uk.

Distributor Opportunity: High-Specification Full-Accessory Nursing Bed

The BCMM-ZR05-1 represents a distinct high-specification product tier in the Grace Medy nursing bed range — differentiated from standard two-function and three-function manual beds by its comprehensive accessory set, motorised height column, and nursing-focused clinical configuration. For distributors building tiered product catalogues for NHS trusts, care homes, and home care supply chains, the BCMM-ZR05-1 fills the fully accessorised nursing bed slot at the top of the manual bed product tier. Contact Medigear.uk for volume terms, commercial review, and full specification documentation.

Height Range: 530–695 mm (Confirm Minimum With Medigear.uk)

The motorised height column spans from a low minimum height to a maximum of 695 mm. The minimum height figure should be confirmed with the Medigear.uk procurement team before procurement, as the image specification is partially unclear. Confirm the exact minimum height and its suitability for falls-risk patient cohorts with Medigear.uk.

Backrest Adjustment: 0° to 75°

The back section adjusts manually from 0° to 75°, covering supine positioning through Fowler's and high-Fowler's for respiratory management, assisted feeding, and post-surgical recovery. The manual back adjustment operates independently of the motorised height column.

Leg Section Adjustment: 0° to 45°

The leg section adjusts manually from 0° to 45°, supporting lower-limb elevation, pressure area management, and comfort positioning for patients on extended bed rest.

Motor System: One Motor Set With Controller and Handle

A single motor set drives the platform height column, supplied with a controller and handle as standard. Back and leg positioning are operated manually. Confirm the motor specification and any manual override provision with the Medigear.uk procurement team.

Stand-Up Puller: Supplied as Standard

A stand-up puller set is supplied as standard, providing patients with a grip point for self-assisted repositioning from lying to seated. Confirm the puller configuration, attachment mechanism, and weight rating with the Medigear.uk procurement team.

Wash Basin: Supplied as Standard

A wash basin is supplied as standard for bedside hygiene and personal care without patient transfer. Confirm basin material, capacity, and attachment or storage configuration with Medigear.uk.

Bed Pan: Supplied as Standard

A bedpan is supplied as standard for bedside continence management. Confirm the bed dimensions and material specifications with the Medigear.uk procurement team before ordering.

Dining Table: Supplied as Standard

A dining table is supplied as standard to support meal delivery and eating from the bed during the elevated back section position. Confirm table dimensions, attachment mechanism, and weight rating with Medigear.uk.

Guardrail: Gear Guardrail Set Supplied

A gear guardrail set is supplied as standard. Confirm guardrail height, material, count, and lowering mechanism with the Medigear.uk procurement team.

Drainage Bag Hooks: Two Supplied as Standard

Two drainage bag hooks are fitted as standard, supporting dual drainage management at the bedside for patients requiring catheter or wound drainage.

IV Stand: Supplied as Standard

An IV stand is supplied as standard. IV stand holes in 4- or 2-diagonal configurations are available as an optional accessory upgrade. Confirm IV stand height and load rating with the Medigear.uk procurement team. Medigear.uk can advise on IV hole configuration options.

8cm Mattress: Supplied as Standard

An 8cm mattress is supplied as standard. Confirm mattress cover material, fire resistance rating, and replacement availability with the Medigear.uk procurement team before placing a fleet order.

The Grace Medy BCMM-ZR05-1 manual nursing bed delivers a CE certified, motor-assisted nursing bed platform with the most comprehensive standard accessory set in the Grace Medy range — including stand-up puller, wash basin, bed pan, dining table, IV stand, dual drainage hooks, and 8cm mattress — along with a full motorised height column, back lift from 0° to 75°, and leg lift from 0° to 45°, suited to nursing wards, rehabilitation units, long-term care settings, and post-discharge home care. Its fully integrated accessory provision, motorised height adjustment, and clinical positioning range make it a high-specification choice for NHS nursing ward procurement officers, regional distributors building full-accessory nursing bed tiers, and individual home care buyers requiring comprehensive bedside provision in a single unit. Full specification, accessory details, and AMC support options are available through Medigear.uk. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.