VENTMED CPAP VM 6

Adults with obstructive sleep apnoea are the patient group for this device. The condition narrows or closes the upper airway during sleep. Breathing stops and starts, and blood oxygen drops.

Pressurised air holds the airway open so breathing carries on. Auto mode is normally selected when therapy begins. The machine records how pressure demand shifts across a night.

A clinician reads that record and settles on a long-term prescription. CPAP mode then holds the agreed figure. Auto mode also suits patients whose needs change over time, since weight, congestion, alcohol, and sleeping position all alter the pressure an airway requires.

Home therapy is the primary setting. Adherence determines whether treatment works, so comfort features carry clinical weight here. Dry air causes nasal irritation and a sore throat, and both drive patients to abandon a machine.

Heated humidification across six levels addresses that, and it can be switched off where a patient dislikes it. Expiratory pressure relief tackles the separate complaint of breathing out against airflow. The compact body and 22 dBA rating point the VM-6 toward travelling patients and light sleepers, or anyone sharing a room.

Auto-altitude supports travel by trimming output as elevation changes. Outpatient sleep services use the weekly and monthly reports to review adherence and event trends between appointments, rather than assessing single nights in isolation.

The lock function supports safe home use, since a prescribed pressure cannot be altered by accident between clinic reviews.

All pressure settings must be prescribed and reviewed by a qualified clinician, and Medigear.uk supplies the full instructions for use with every unit.

Quietest Rating in the VENTMED Bedside Range

At 22 dBA or less, the VM-6 is rated three decibels below the DS-6, which matters where a partner shares the room.

Thermostatic Rather Than Simple Heated Humidification

Regulating chamber temperature gives steadier output than applying heat alone, so humidity does not swing across the night.

Anti-Backflow and Dry-Burn Protection

Two of the commonest ways a humidifier chamber fails in home use are designed against directly, which reduces replacement cost over a fleet.

Humidification That Can Be Turned Off

The 0 to 5 range lets a patient disable humidification entirely rather than only reduce it, useful in humid conditions.

Weekly and Monthly Reporting

Reports covering a week and a month suit follow-up review far better than single-night summaries, which rarely show a trend.

Synchrony Handled by Predictive Algorithm

AST anticipates the respiratory waveform rather than reacting to it, targeting the timing that decides whether therapy feels natural.

Compact and Portable Form

VENTMED markets the VM-6 for its small size and light weight, so it suits patients who travel and would otherwise pause therapy.

Auto-Altitude Correction Built In

Output is trimmed as ambient pressure changes with elevation, so a travelling patient does not need to alter settings.

Lock Function for Prescription Safety

Settings can be locked so a patient cannot change a prescribed pressure between clinical reviews.

Single-Unit and Fleet Ordering Through Medigear.uk

Medigear.uk supplies the VENTMED Auto CPAP VM-6 as individual orders for private clinics and as framework volumes for NHS respiratory services.

CPAP and Auto Work Modes

Fixed-pressure and self-adjusting operation are both available from a single unit.

4 to 20 cmH2O Automatic Adjustment

Pressure tracks demand within the prescribed band throughout the night.

Auto Pressure Titration

The device settles on the lowest pressure that keeps the airway clear rather than running high all night.

Expiratory Pressure Relief, 0 to 3 Levels

Pressure drops on exhalation across four selectable settings.

Automatic Synchronization Technology

The respiratory waveform is anticipated and matching pressure supplied, targeting machine-patient synchrony.

Integrated Thermostatic Humidifier, Levels 0 to 5

Chamber temperature is regulated across six settings, including fully off.

Anti-Backflow Chamber Design

Water is prevented from travelling back toward the device, with protection against dry burning and overflow.

200 mL Water Tank

The chamber holds up to 200 mL, sized for a night of therapy without daily refilling mid-session.

Ramp Time, 0 to 60 Minutes

Adjustable in one-minute steps so pressure builds gradually at the start of a session.

Auto ON and OFF

Therapy starts and stops on detected breathing rather than a button press.

Auto-Altitude Adjustment

Delivered pressure is corrected as ambient conditions change with elevation.

Leak Compensation, Awake and Breath Event Detection

Flow is corrected when the seal slips, and both wakefulness and respiratory events feed the auto algorithm.

2.8 Inch TFT Display, 320 x 240

The screen dims after 15 minutes and returns on any keypress.

Lock Function and Over-Temperature Protection

Prescribed settings can be locked, and the blower halts with four beeps on an over-temperature condition.

Weekly and Monthly Sleep Study Reports

Stored data is turned into period reports rather than single-night summaries.

The VENTMED Auto CPAP VM-6 covers the standard auto CPAP feature set across 4 to 20 cmH2O while differentiating on three points that matter in practice: a 22 dBA rating, a thermostatic humidifier with anti-backflow and dry-burn protection, and reporting that spans a week and a month rather than a single night. Together, those suit light sleepers, travelling patients, and services that review adherence at intervals. Medigear.uk supplies the unit alongside masks, hoses, filters, and replacement chambers, quoting single machines or fleet volumes. Before supply, Medigear.uk will confirm the acoustic rating in writing, the device height figure, unit weight, hardware revision and connectivity, the UK conformity route, and warranty terms.