ROUNDFIN RD-907S-E Grossing Station

General pathology inpatient and research environments represent the primary deployment setting for the ROUNDFIN RD-907S-E grossing station. Contamination governance and formalin exposure management are non-negotiable in these settings; the enclosed structure directly addresses both by containing vapour within the dual exhaust and activated carbon filtration pathway. NHS trust procurement teams sourcing through Medigear.uk will find the CE and ISO certification suite sufficient for standard clinical procurement workflows, and full documentation is available on request.

Intensive care pathology and high-dependency laboratory settings place additional demands on ventilation precision and operational quietness. The RD-907S-E's dual-fan air system, running at 2800 rpm with a starting noise level of 50 dB, allows the unit to operate continuously without disrupting adjacent clinical procedures. The motorised height adjustment between 800 mm and 1000 mm enables staff to optimise ergonomic positioning without producing mechanical noise during sensitive or time-critical work.

Pathology rehabilitation departments — including those conducting progressive post-mortem analysis and forensic tissue processing — benefit from the modular 7.3-piece table surface and the detachable drainage configuration. The RD-907S-E can be reconfigured as workflow demands shift across the processing cycle, and the electric flushing drainage eliminates manual cleaning steps between cases. The adjustable height range reduces operator fatigue across extended sessions, directly supporting physiotherapy-aligned occupational health standards.

Home-laboratory and private pathology settings represent a growing segment of RD-907S-E procurement. Organisations and individual researchers purchasing through Medigear.uk benefit from the castor wheel mobility system, which allows the unit to move between fixed and mobile positions without tools. The touchscreen centralises all operational controls, making solo operation straightforward without specialist technical training. Medigear.uk provides full buyer support, including specification consultations and procurement documentation.

Hospital-Grade Formalin Containment Built Into Every Layer

The RD-907S-E achieves formalin containment through a layered engineering approach rather than a single control point. The fully enclosed, splash-proof structure prevents aerosol escape at the work surface; the dual-fan exhaust system removes airborne vapour at the source; and the activated carbon filtration unit captures residual particulates before air is discharged. This three-stage containment architecture meets the occupational exposure and contamination governance standards routinely required by hospital laboratories and NHS procurement frameworks—institutions sourcing via Medigear. The UK receives full technical documentation supporting this specification.

Motorised Height Adjustment That Protects Operator Health

The continuous motorised height adjustment between 800 mm and 1000 mm is not a convenience feature — it is an occupational health safeguard. Operators across different heights can configure the work surface to their ergonomic optimum without manual effort or mechanical ratcheting, reducing cumulative musculoskeletal loading across high-volume processing days. This is particularly relevant in NHS trust laboratories where health and safety compliance is monitored and reported. The hydraulic push rod system ensures smooth, vibration-free adjustment without interrupting specimen handling mid-task.

Centralised Touch Screen Reduces Procedural Error Risk

Distributing machine controls across multiple physical switches and dials increases the probability of missed or incorrect settings during high-pressure specimen processing. The RD-907S-E resolves this with a single integrated touchscreen panel that controls table height, UV disinfection, drainage, and ventilation speed from a single interface. Operators can confirm the machine's full operating state at a glance before initiating a case, and the keyboard lock function prevents accidental changes during active procedures. Clinical governance leads and laboratory managers responsible for procedural compliance particularly value this control architecture.

CE and ISO Certification Ready for Institutional Procurement

Procurement teams operating within NHS or private hospital supply chains require verifiable certification before committing to capital equipment purchases. The RD-907S-E carries both CE marking and ISO certification, satisfying the standard documentary requirements for regulated laboratory equipment procurement. This eliminates the additional lead time that non-certified equipment creates in institutional approval pathways. Medigear.uk supplies full certification documentation as part of the procurement pack, streamlining the approval process for procurement officers and supply chain leads.

Dual Exhaust Air System Engineered for High-Volume Environments

A single exhaust port is a single point of failure for fume management. The RD-907S-E runs two independent fans, each contributing to a combined throughput of 1960 cubic metres per hour, providing redundancy and consistent airflow even under sustained high-volume use. Operating noise begins at 50 dB, which is within acceptable limits for shared or multi-bay laboratory environments. The air system's 560 W motor rating confirms that its performance specification is designed for continuous professional use rather than intermittent operation.

Integrated Pulveriser Eliminates Secondary Instrument Requirements

Most grossing workbench configurations require a separate high-speed pulveriser to mechanically process dissected material. The RD-907S-E integrates this capability directly into the bench at 4200 revolutions per minute with a 1200 ml processing capacity, reducing the number of discrete instruments required in the laboratory and the associated procurement, maintenance, and space costs. For B2B distributors speccing out complete pathology suite fit-outs, this integration reduces the total bill of materials and simplifies the installation footprint. Medigear.uk can advise on suite-level procurement packages that include the RD-907S-E.

OEM and ODM Flexibility for Distributor and Institutional Buyers

The RD-907S-E is available in OEM and ODM configurations, providing B2B distributors and large institutional buyers with flexibility that standard catalogue products do not offer. The most commonly requested upgrade — a 316-grade stainless steel frame in place of the standard 304-grade — is confirmed as an available option and adds corrosion resistance in environments with higher chemical exposure. Custom documentation, co-branded materials, and volume pricing structures are all accessible through the Medigear.uk procurement team.

Mobile and Fixed Deployment From a Single Unit

Committing a capital equipment purchase to a fixed position is a significant operational constraint. The RD-907S-E avoids this through its braked castor wheel system, which allows the bench to move freely between laboratory bays, adjacent rooms, or storage positions without tools. Locking the castors provides the stability required for active specimen processing, while releasing them takes seconds. For institutions managing multiple laboratory spaces or planning future layout changes, this flexibility protects the long-term utility of the procurement.

Full Waste Management System With Alarm-Supported Oversight

The RD-907S-E includes a formalin distribution and collection system with a full alarm function that actively monitors waste liquid levels and alerts operators before overflow or system failure occurs. This removes the manual monitoring burden on technicians during complex processing cases and reduces the risk of formalin spills that generate clinical incident reports. The table automatic washing machine rounds out the waste management suite, ensuring that post-case cleaning is built into the workbench itself. Individual buyers and smaller private laboratories will find that this integrated approach significantly reduces post-procedure time and the risk of chemical handling.

Minimum Table Height: 800 mm

The lowest operational position of the RD-907S-E work surface is 800 mm from floor level. This lower limit accommodates shorter-stature operators and reduces the need for anti-fatigue matting or platform steps in multi-operator environments. It also brings the work surface closer to a natural wrist height for seated-adjacent working postures, which is relevant in rehabilitation pathology settings where extended processing sessions are common.

Maximum Table Height: 1000 mm

The upper adjustment limit of 1000 mm accommodates taller operators and elevated-posture working preferences, providing a total travel range of 200 mm across the motorised height system. This upper limit is consistent with standard pathology bench ergonomic guidelines and ensures that overhead clearance to the enclosed upper structure is maintained throughout the full adjustment range.

Total Height Adjustment Range: 800 mm to 1000 mm (200 mm Travel)

The full 200 mm of motorised vertical travel provides meaningful ergonomic flexibility across a realistic range of operator heights and working preferences. Adjustment is continuous via the touch screen interface rather than stepped, meaning operators can stop at any position within the range without being constrained to preset increments. This precision is particularly relevant in high-volume environments where multiple technicians share the same bench across shifts.

Frame Articulation: 7.3-Piece Detachable Table Plate System

The work surface consists of 7.3 discrete, detachable table plate sections, each removable for deep cleaning, replacement, or reconfiguration. This modular architecture allows the surface layout to be adapted to different specimen processing protocols without requiring a full bench replacement. The electric flushing system integrated within the surface framework automates the initial cleaning cycle between cases, reducing the manual handling of contaminated surface sections.

Rail System: Fully Enclosed Splash-Proof Window Structure

The upper enclosure of the RD-907S-E serves as a fully enclosed, splash-proof window, replacing a conventional open-rail system with a continuous sealed barrier. This structure prevents liquid aerosol, tissue fragments, and formalin vapour from escaping laterally or upward from the work zone. The enclosed design also provides a stable mounting surface for the UV disinfection system and the backdraft and under-sink exhaust ventilation channels.

Remote Controller: Integrated Touch Screen with Keyboard Lock

All machine functions are governed by a single touchscreen operating panel rather than a distributed set of physical controls. The panel manages table height, UV disinfection, drainage, ventilation speed, and the flushing cycle. A dedicated keyboard and display screen holder provides a stable interface position, and the lock function turns off input during active specimen processing to prevent accidental parameter changes. Medigear.uk can supply user interface documentation for training and commissioning purposes.

Head and Footboard Material: 304 Stainless Steel (316 Optional)

The entire frame, including the head and foot structural components, is fabricated from 304 stainless steel, which provides corrosion resistance and structural integrity under repeated chemical exposure and wet cleaning cycles. A 316 stainless steel variant is available as a confirmed optional upgrade, offering enhanced resistance to chloride environments and more aggressive cleaning agents. The 316 option is particularly relevant for facilities that use hypochlorite-based surface disinfectants or operate in humid coastal environments.

Mattress Platform Dimensions: 1520 × 890 mm Work Surface

The usable stainless steel work surface measures 1520 mm in length and 890 mm in width, providing sufficient area to accommodate large specimen boards, standard pathology trays, and the associated hand instruments without crowding the operator workspace. This surface dimension is compatible with most standard pathology tray configurations used in hospital laboratories.

Sink Specification: 340 × 400 × 250 mm with Rear Separator

The integrated sink measures 340 mm wide, 400 mm front-to-back, and 250 mm deep, with a built-in rear separator that prevents solid tissue and debris from entering the drainage system. Hot and cold water is delivered through a mixing faucet with a swing spout and wrist blade handles, and a foot pedal is included for fully hands-free water control. This combination of hands-free and hands-on control options supports both standard protocol and high-contamination-risk specimen processing.

Fold Mechanism: Castor Wheel Mobility System

The RD-907S-E does not use a fold mechanism but achieves equivalent portability through four braked castor wheels, allowing the unit to move freely in any direction across standard laboratory flooring. Locking the castors takes the bench from mobile to fully stable in one action, without tools or adjustment. This mobility system is appropriate for facilities that need to periodically reconfigure laboratory layouts or share a bench between adjacent spaces.

Frame Material: 304 Stainless Steel (316 Available on Request)

The primary structural material throughout the frame is 304-grade stainless steel, selected for its combination of corrosion resistance, weldability, and durability of surface finish under pathology laboratory conditions. The 304 grade is the standard specification for hospital-grade laboratory furniture in most institutional procurement frameworks. Buyers requiring enhanced chemical resistance can request the 316 option through the Medigear.uk procurement team.

Castor Specification: Braked Wheels, Full 360° Rotation

The RD-907S-E is fitted with castor wheels that rotate through a full 360-degree arc, enabling precise directional control during repositioning without requiring the bench to be lifted or tilted. The integrated brake mechanism on each caster locks independently, providing multi-point stability during operation. This specification allows the unit to be positioned in irregular bay configurations where a straight-line approach is not always possible.

Air System: Dual Fan, 2800 rpm, 1960 m³/h, 560 W, 50 dB

The ventilation system is powered by two fans running at 2800 revolutions per minute, producing a combined airflow volume of 1960 cubic metres per hour. The system motor draws 560 W and operates at a noise onset level of 50 dB, which is below the threshold that triggers noise-exposure management requirements in most laboratory occupational health frameworks. The dual-fan configuration provides ventilation redundancy and ensures that airflow performance is maintained even under extended continuous operation. Medigear.uk can supply the full air system technical specification for integration into facility ventilation assessments.

Pulveriser: 4200 rpm, 1200 ml Capacity, High-Power Integrated

The integrated high-power pulveriser operates at 4200 revolutions per minute with a 1200 ml processing capacity, eliminating the need for a separate bench-top instrument for mechanical tissue dissociation. The pulveriser is built into the base of the RD-907S-E frame, keeping the main work surface clear for specimen handling. Its integration with the drainage and flushing system ensures that pulverised material is managed within the bench's waste collection pathway rather than requiring manual transfer.

UV Disinfection: Integrated Cycle via Touch Screen Control

The UV disinfection system is activated and monitored via the central touchscreen panel, integrating the disinfection cycle into the same control interface as all other bench functions. UV disinfection at the end of each processing session reduces surface bioburden without the chemical residue associated with liquid disinfectants, which is particularly relevant for benches processing multiple case types within a single shift. The system status is visible on the touchscreen throughout the cycle, providing a clear audit trail for infection-control documentation.

The ROUNDFIN RD-907S-E grossing station is CE- and ISO-certified, a 304 stainless steel pathology workbench built to serve ward laboratories, high-dependency units, rehabilitation settings, and private research environments equally. Its dual-exhaust air system moves 1960 cubic metres of air per hour, while the enclosed splash-proof structure, activated carbon filtration, and UV disinfection cycle maintain strict contamination control. The motorised height adjustment, touchscreen operation, and hands-free faucet controls reduce the risk of manual handling and support compliance with occupational health standards. The RD-907S-E meets the procurement and clinical standards required by NHS trusts, B2B distributors, and individual buyers alike. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.