HLM2-CJ05-1

In the general adult inpatient ward, the HLM2-CJ05-1 supports daily care delivery for patients requiring frequent repositioning, semi-Fowler dining, and assisted transfer. The 0–70° backrest range supports respiratory comfort and meal-time posture, while the 0–30° leg lift relieves dependent oedema and supports venous return. The fixed 450 mm surface height aligns with modern NHS fall-prevention guidance for lower transfer surfaces, reducing the perceived fall distance for unassisted egress. Medigear.uk provides framework-aligned quotations and post-installation support to trust procurement teams.

In step-down and rehabilitation units, the manual crank mechanism is a positive asset rather than a limitation. The progressive crank motion allows physiotherapists to pause articulation at the exact angle a patient can tolerate, thereby supporting incremental sit-up tolerance after surgery or prolonged bed rest. The absence of motorised mechanisms means there is no audible whine during early-morning physiotherapy rounds, and no battery downtime if the bed is briefly relocated. Medigear.uk supports rehabilitation services with bulk fleet pricing and rolling replacement schedules.

In paediatric step-down and convalescent care, the wood-finish head and foot boards soften the clinical aesthetic for younger patients without compromising on wipe-clean infection-control surfaces. The bed is intended for older paediatric and adult dimensions; specific suitability for younger children should be confirmed against the patient assessment and Medigear.uk product guidance.

In home care and post-discharge settings, the HLM2-CJ05-1 offers a dependable, low-maintenance alternative to motorised beds. Carers and family members operate the two cranks without any technical training, and power outages or battery failures do not interrupt patient positioning. The fixed 450 mm height supports safer self-transfer for partially ambulant home users. Medigear.uk provides individual buyer support, mattress pairing advice, and delivery scheduling for home installations.

Hospital-Grade Articulation Without Power Dependency

The HLM2-CJ05-1 delivers a 0–70° backrest and 0–30° leg-rest articulation purely through mechanical cranks, removing every electrical failure point common to motorised beds. There is no battery to charge, no power lead to manage, and no motor service interval to schedule. For wards subject to occasional power interruption, this is a meaningful reliability gain. Medigear.uk supplies the bed ready for immediate clinical use on arrival.

CE Certification and Documented Procurement Compliance

The HLM2-CJ05-1 is supplied with manufacturer-declared conformity to applicable medical device certifications, supporting procurement workflows for NHS, private hospitals, and international distributors. Documentation packs covering CE marking and ISO 13485 quality system alignment are available from Medigear.uk on request. Procurement teams gain a single supplier point of contact for both the device and its supporting paperwork. Verified supplier status reduces audit overhead during framework reviews.

Fixed 450 mm Surface Height for Safer Transfers

A fixed 450 mm sleeping surface positions the patient at a clinically efficient transfer height, halfway between standing and fully supine. This reduces the effort required during sit-to-stand mobilisation and shortens the perceived fall distance during unassisted egress. For step-down wards focused on reducing fall metrics, a consistent transfer height is a tangible governance benefit. The fixed height also simplifies pairing with bedside chairs.

Two-Section Articulation Tuned to Real Clinical Use

Rather than offering many marginal articulation modes, the HLM2-CJ05-1 focuses on the two adjustments that matter most in daily care: backrest and leg rest. This focused design reduces the cognitive load on carers and shortens the time to reach a desired position. The result is faster repositioning during pressure-area rounds and quicker preparation for meals and physiotherapy. Fewer mechanisms also means fewer wear points across the bed's service life.

Distributor-Friendly Frame and Packaging Profile

The 2060 × 980 mm frame and modular packaging make the HLM2-CJ05-1 well-suited to bulk container loading and onward distribution. Distributor partners can stack and freight efficiently, and Medigear.uk supports OEM badging, packaging customisation, and bulk specification adjustments under negotiated terms. Lead times scale predictably with order volume, supporting forecastable replenishment cycles for regional partners.

Wood-Finish Head and Foot Boards for Softer Care Environments

The HLM2-CJ05-1 carries wood-finish head and foot boards rather than the clinical white plastic found on most ward beds. This softer aesthetic suits paediatric step-down areas, rehabilitation suites, and home-care environments where the bed needs to integrate with domestic furniture. The boards remain wipe-cleanable and compatible with standard infection-control protocols. Medigear.uk can advise on alternative finish options for OEM partners.

Single-Nurse Manoeuvrability on Four Castors

Mounted on four castors with locking brakes, the HLM2-CJ05-1 enables single-nurse manoeuvrability between rooms, treatment bays, and storage areas. Brake engagement is straightforward and provides positive parking stability during patient care. The moderate frame width supports navigation through standard ward corridors and lift entries. Medigear.uk can provide dimensional drawings for site planning before delivery.

Cost-Efficient Lifecycle for Individual Buyers

For home users and individual buyers managing post-discharge care, the HLM2-CJ05-1 offers a clinically capable bed without the upfront and lifetime costs of a motorised system. There are no electrical service intervals, no battery replacements, and no risk of motorised malfunction in a domestic environment. Medigear.uk supports individual buyers with mattress pairing advice and delivery scheduling tailored to home access.

Verified Supplier Service Through Medigear.uk

Every HLM2-CJ05-1 unit is supplied with the supporting documentation, after-sales contact, and procurement responsiveness expected of a verified supplier. Hospital trusts, distributor partners, and home buyers all benefit from a single accountable supply route through Medigear.uk. Quotations, technical clarifications, and bulk pricing are handled by the same procurement team end-to-end.

Bed Surface Height: Fixed 450 mm

The HLM2-CJ05-1 is set at a fixed height of 450 mm from the floor to the sleeping surface. This height supports safer assisted transfer and lowers the perceived fall distance for unassisted egress, which aligns with current NHS fall-prevention guidance for adult care.

Backrest Articulation: 0° to 70° (±5°)

The backrest crank delivers articulation from 0° flat to 70° elevated, with a manufacturer tolerance of ±5°. This range covers supine rest, semi-Fowler's position, Fowler's position for respiratory comfort, and a near-upright posture for dining and reading.

Leg Rest Articulation: 0° to 30° (±5°)

The leg-rest crank delivers articulation from 0° flat to 30° elevated, with a manufacturer tolerance of ±5°. This range supports lower-limb pressure relief, oedema management, and a comfortable knee-flexed position during extended bed rest.

Two Independent Hand Cranks

Two separate cranks control the backrest and leg rest, allowing the carer to position each section independently. The cranks fold under the footboard when stowed to prevent trip and snag hazards on the ward.

Sealed Mechanical Linkage

Each crank drives the articulation through a sealed mechanical linkage rather than a linear motor. This removes battery dependency, motor service intervals, and electromagnetic interference concerns from the bed's operating profile.

Overall Frame Dimensions: 2060 × 980 mm

The bed measures 2060 mm long by 980 mm wide overall, fitting comfortably within standard ward bay allocations and corridor clearances. The footprint also suits home care environments with typical doorway widths.

Sleeping Platform Sized for Standard Hospital Mattresses

The sleeping platform accepts standard hospital mattresses sized approximately 1900 × 900 mm, with depth typically between 100 mm and 150 mm. This compatibility lets buyers source mattresses against routine ward and home-care stock lines.

Welded Steel Mesh Platform

The sleeping platform is a welded steel mesh construction that supports mattress ventilation and provides robust load distribution across the bed's service life. The mesh also allows staff to inspect the underside of the mattress during pressure-area rounds quickly.

Powder-Coated Steel Frame

The frame is fabricated from powder-coated steel for durability, dimensional stability, and corrosion resistance through repeated cleaning cycles. Powder coating is compatible with standard hospital disinfectants without surface degradation.

Wood-Finish Head and Foot Boards

Head and foot boards carry a wood-finish panel that softens the bed's appearance for paediatric step-down areas, rehabilitation suites, and home installations. The boards remain wipe-cleanable for routine infection control. Medigear.uk can advise OEM partners on alternative finishes.

Four-Castor Base with Locking Brakes

The bed is mounted on four castors, with locking brakes provided for parking stability. Single-nurse manoeuvrability is achievable across standard ward corridors and lift entries.

Side-Rail Compatibility

Side-rail mounting provisions allow the fitment of compatible safety rails when the clinical risk assessment requires fall-prevention support. Medigear.uk supplies side-rail options and pairing guidance during procurement.

Foldable Crank Handles for Trip-Hazard Reduction

The crank handles fold and stow under the footboard when not in use, removing protrusions from the patient zone and reducing the risk of trips during bedside care.

Manufacturer-Declared CE Conformity

The HLM2-CJ05-1 is supplied with manufacturer-declared CE conformity under the applicable medical device framework. Supporting documentation is available from Medigear.uk for procurement and audit use.

ISO 13485 Quality System Alignment

The bed is manufactured under a quality system aligned to ISO 13485, the international standard for medical device quality management. This alignment supports buyer confidence in consistent build quality across orders.

Compatibility with Standard Care Accessories

The HLM2-CJ05-1 accommodates standard care accessories such as IV poles, overbed tables, and drainage bag hooks. Medigear.uk can bundle accessories at the quotation stage on request.

The HLM2-CJ05-1 Two-Crank Manual Nursing Bed is a focused, dependable care platform that delivers clinically meaningful articulation without the cost, complexity, or service overhead of a motorised system. With a 0–70° backrest, 0–30° leg rest, fixed 450 mm surface height, and a 2060 × 980 mm frame supplied under manufacturer-declared CE conformity and ISO 13485 quality alignment, the bed serves general inpatient wards, step-down and rehabilitation units, paediatric convalescent areas, and home recovery settings with the same proven design. Wood-finish boards, foldable cranks, and a braked four-caster base round out a bed suited to hospitals, distributor partners, and individual buyers. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.