Grace Medy BCM3-ZR05-3

Pressure care wards benefit from the Grace Medy BCM3-ZR05-3 manual full-curve nursing bed's lateral-turning function, which allows nurses to reposition a patient to a 0–45° lateral tilt for pressure-area offloading without a full manual body turn. For patients at high risk of pressure injury, mechanically assisted lateral tilt significantly reduces manual handling burden per repositioning event. Medigear.uk supports NHS pressure care and nursing ward procurement teams throughout the specification and approval process.

Rehabilitation settings benefit from the BCM3-ZR05-3's sitting-position function, which provides a compound back-and-leg configuration for early rehabilitation, alongside a leg-lift range of 25°–80° for sustained lower-limb elevation during exercises and post-surgical recovery. The lateral turning function also supports chest physiotherapy positioning during bedside respiratory sessions. Medigear.uk can provide specification packs for rehabilitation procurement teams.

Long-term care settings benefit from the BCM3-ZR05-3's lateral-turning capability for ongoing pressure-area management in patients with limited voluntary movement. The optional shampoo basin, bed pan, drainage hooks, and IV stand support bedside hygiene and concurrent medical management for patients who cannot transfer. Medigear.uk can provide documentation for complex care and long-term unit procurement assessments.

Home care settings benefit from the BCM3-ZR05-3 for patients with spinal injury, neurological conditions, or post-surgical immobility, where the lateral turning function allows a single carer to reposition for pressure management without a full manual patient turn. The dual stainless steel cranks provide durable, corrosion-resistant performance for domestic use. Medigear.uk offers individual buyer consultation and delivery coordination for families arranging home nursing provision for patients with complex positioning needs.

Lateral Turning Function for Assisted Pressure Area Repositioning

The BCM3-ZR05-3 provides lateral turning from 0° to 45° left and right, allowing nursing staff to tilt the bed platform into a lateral position for pressure area offloading without requiring a full manual patient turn. For patients at high or very high risk of pressure injury, mechanical lateral repositioning assistance directly reduces the manual handling burden on nursing staff for one of the most frequent and physically demanding nursing interventions. The 45° tilt range is sufficient for clinical pressure redistribution protocols used in complex nursing care environments. Confirm the lateral turning mechanism and operation sequence with Medigear.uk before procurement.

Leg Lift Starting at 25° for Continuous Lower-Limb Elevation.

The BCM3-ZR05-3's leg section operates from 25° to 80° rather than the standard 0°–45° range of most hospital beds in the Grace Medy range. This elevated starting position provides continuous lower-limb elevation even at the minimum setting, making the BCM3-ZR05-3 appropriate for patients with peripheral oedema, post-operative venous management requirements, or clinical protocols requiring maintained leg elevation throughout the care period. For procurement officers specifying beds for vascular, orthopaedic, or complex medical patients, the non-zero leg lift minimum is a clinically relevant specification. Medigear.uk can provide comparison documentation between the BCM3-ZR05-3 and standard-range leg lift models.

Five Named Positioning Functions for Complex Nursing Protocols

The BCM3-ZR05-3 provides five named positioning functions — back lift, leg lift, sitting position, turn left, and turn right — covering the clinical positioning range required for complex nursing care without requiring supplementary equipment or manual patient handling for most repositioning events. The named sitting position function provides a single compound configuration that combines back elevation and leg support, eliminating the need for staff to manually coordinate two crank adjustments to achieve a sitting position. For clinical settings with formalised repositioning protocols, named position functions reduce the risk of protocol deviation by providing clearly specified endpoints.

Stainless Steel Dual Cranks as Standard Specification

The BCM3-ZR05-3 is fitted as standard with two stainless steel crank handles, providing greater durability and corrosion resistance than ABS alternatives across a high-intensity nursing bed usage profile. The stainless steel specification is compatible with standard hospital-grade disinfectants, reducing the risk of crank mechanism degradation from repeated decontamination over the bed's service life. The dual-crank configuration separates the operational control of different positioning functions, reducing the risk of accidentally activating the wrong function during clinical use. Confirm crank-to-function assignment with Medigear.uk.

CE Certification for NHS Pressure Care and Nursing Ward Procurement

The BCM3-ZR05-3 carries CE marking under Medical Device Directive 93/42/EEC, satisfying the baseline requirement for NHS nursing ward and pressure care unit procurement frameworks, CQC-regulated care settings, and OJEU tendering. Medigear.uk holds the complete declaration of conformity and technical file, available to procurement officers and clinical governance reviewers on request. For distributors building complex nursing-bed product tiers for NHS trusts and specialist care home supply chains, TPE certification supports straightforward product-listing compliance.

Optional Accessory Configuration for Progressive Bedside Build-Out

The BCM3-ZR05-3 offers a range of optional accessories — IV stand, drainage bag hooks, bed pan, shampoo basin, and IV stand holes — allowing procurement teams and home care buyers to configure the bedside provision appropriate to the clinical setting without paying for accessories not required in that environment. The mattress is also listed as optional, allowing buyers to pair the BCM3-ZR05-3 with a full-curve compatible mattress of their choice. For distributors building tiered product catalogues, the optional accessory structure supports flexible product positioning across NHS, care home, and home care supply channels. Confirm all optional accessory specifications with Medigear.uk.

Distinct Clinical Profile: Full-Curve vs Standard Manual Nursing Bed

The BCM3-ZR05-3 occupies a clearly distinct clinical tier above the standard BCMM-ZR05-1 manual nursing bed in the Grace Medy range, defined by the addition of a lateral-turning function, a positive-only leg-lift range, a named sitting position, and a "full-curve" compound-positioning capability that standard three-function beds cannot replicate. For NHS procurement officers and distributors building product catalogues that need to address both standard nursing beds and complex pressure-care beds, the BCM3-ZR05-3 fills the full-curve positioning tier alongside, rather than in place of, standard manual models. Medigear.uk can provide side-by-side specification comparison documentation.

Infrastructure-Independent Pressure Care Positioning

The BCM3-ZR05-3 delivers all five position functions via dual manual cranks. It requires an electrical connection to the bed frame, making it well-suited to nursing ward bays, rehabilitation rooms, and home care environments where motor-driven bed infrastructure is unavailable or a lower capital cost is preferred. For clinical settings where pressure care repositioning needs to occur reliably regardless of motor availability or electrical supply, the manual crank mechanism provides a dependable operational basis that is independent of power infrastructure. Medigear.uk can provide cost-comparison documentation across the manual and electric nursing bed ranges.

Fixed Platform Height: 560 mm

The BCM3-ZR05-3 operates at a fixed platform height of 560 mm, appropriate for nursing procedures and bedside clinical assessments. The fixed-height specification means platform height is not adjustable; confirm suitability against clinical height requirements with the Medigear.uk procurement team.

Backrest Adjustment: 0° to 75° (±5°)

The back section adjusts from a fully flat 0° to a maximum of 75° with a tolerance of ±5°, covering supine positioning through Fowler's and high-Fowler's for respiratory management, assisted feeding, and post-surgical recovery.

Lateral Turning: 0° to 45° (±5°) Left and Right

The turning function tilts the bed platform laterally from 0° to 45° in either direction, with a stated tolerance of ±5°. This is the primary clinical differentiator of the BCM3-ZR05-3 within the Grace Medy manual nursing bed range. Confirm the turning mechanism and operation sequence with Medigear.uk.

Leg Section Adjustment: 25° to 80° (±5°)

The leg section adjusts from 25° to 80°, with a stated tolerance of ±5°. The 25° minimum means the leg section is always elevated and never rests flat. Confirm the leg section resting position and clinical suitability with the Medigear.uk procurement team.

Named Sitting Position Function

A named sitting position provides a single compound configuration combining back elevation and leg positioning, allowing nursing staff to select an established sitting posture without manually coordinating multiple cranks. Confirm the sitting position specification angles with Medigear.uk.

Dual Stainless Steel Crank Handles: Standard Specification

Two stainless steel crank handles are supplied as standard, providing durable, corrosion-resistant performance for high-intensity nursing use. Confirm the crank-to-function assignment, folding or fixed design, and storage configuration with the Medigear.uk procurement team.

Guardrail: Gear Guardrail Set Supplied

A gear guardrail set is supplied as standard. Confirm guardrail height, material, count, and lowering mechanism with the Medigear.uk procurement team.

Mattress: Optional

The mattress is listed as an optional accessory rather than a standard fitting. Confirm mattress availability, recommended depth for full-curve use, and the ordering process with Medigear.uk before placing an order.

5-Inch Casters: Four Fitted as Standard

Five-inch casters ×4 are fitted as standard. Confirm the castor brake mechanism, load rating, and floor compatibility with the Medigear.uk procurement team.

Frame Material: High-Grade Powder-Coated Steel

The load-bearing frame is constructed from high-grade steel with a powder-coated surface finish resistant to repeated cleaning with standard hospital-grade disinfectants. Chemical compatibility information is available from Medigear.uk for infection control assessments.

CE Certification: 93/42/EEC

The BCM3-ZR05-3 carries CE marking under Medical Device Directive 93/42/EEC. Full certification documentation, declaration of conformity, and technical files are available through Medigear.uk for NHS procurement submissions, OJEU tendering, and clinical governance review.

Optional Accessories: IV Stand, Drainage Hooks, Bed Pan, Shampoo Basin

Optional accessories include an IV stand, drainage bag hooks (×2), a bedpan, a shampoo basin, and IV stand holes in 4- or 2-diagonal configurations. Confirm accessory specifications, pricing, and availability with the Medigear.uk procurement team when ordering. Medigear.uk can advise on the appropriate optional configuration for each clinical setting.

The Grace Medy BCM3-ZR05-3 manual full-curve nursing bed delivers a CE certified, five-function manual positioning platform with lateral turning from 0° to 45°, back lift from 0° to 75°, leg lift from 25° to 80°, a named sitting position, and dual stainless steel cranks within a 2050 × 960 mm frame — suited to pressure care wards, rehabilitation units, complex nursing environments, long-term care settings, and home care for patients with complex repositioning needs. Its lateral turning capability, positive-only leg lift range, and full-curve positioning profile make it a clinically distinct choice for NHS pressure care procurement officers, regional distributors building full-curve nursing bed product tiers, and individual home care buyers managing patients with advanced mobility limitations. Full specification, accessory configuration options, and certification documentation are available through Medigear.uk. Contact Medigear.uk for specifications, procurement assistance, or expert consultation.